Sears 200.71486 manual Using the built-in light

Page 6

5.4Charge the Portable Power 750 as soon as possible after each use.

Because the DC power outlet is internally wired directly to the internal battery, extended operation of a 12V DC device may result in excessive battery drain.

6.12v dc electrical device example run-time chart

Appliance Type

Estimated Power

Estimated

 

 

Time*

Fluorescent Lights, Cellular Phones

4 Watts

20 Hours

Radios, Depth Finders, Fans

9 Watts

14 Hours

Camcorders, DVD Players, Spotlights

15 Watts

8

Hours

Electrical Tools, Bilge Pumps

24 Watts

5

Hours

Electric Coolers

48 Watts

2

Hours

Air Compressors, Car Vacuums

80 Watts

1

Hour

*NOTE: Estimated run-times. Actual time may vary. Times are based on the internal battery being new, fully charged and operated at room tem- perature.

7.using the built-in light

7.1Position the 750 on a flat, stable surface near the intended work area.

7.2Turn the Light/Display switch to the LIGHT position. The light will turn on and illuminate your work area.

NOTE: With a fully charged internal battery, the built-in light should provide 18 to 30 hours of continuous useful light, depending on ambient conditions.

7.3Turn the Light/Display switch to the OFF position when work is completed.

7.4Charge the 750 as soon as possible after using the built-in light.

4

Image 6
Contents Portable Power Model NoTable of Contents Important Charge Immediately After Purchase Jump-starting a vehicle engine Powering a 12v dc device Using the built-in light Led indicators Replacement Light Bulb