TC electronic SDN BHD PowerCore user manual Setup, System Information

E N G L I S H

SETUP PAGE

By clicking on the Setup tab in the control panel, you will be able to perform some advanced tweaks to your PowerCore system.

SYSTEM INFORMATION

The System information indicates the current PowerCore software, drivers and Control Panel versions.

Check for update

By pressing the CHECK FOR UPDATE button the software will automatically access the internet and check to see if a newer version is available for download. Before downloading you will be prompted and asked to confirm the download.

System Report

If for some reason you need to get in contact with our support center they will ask to see a system report. The system report is a small text-file containing all relevant information of your current system. To create a system report, press the SYSTEM REPORT button. The file will be saved on your desktop. The system report file will not contain any personal information, and TC will use the information only in order to help with issues.

SYSTEM SETUP - plug-in loading

The System Setup options controls the way the plug-ins are loaded onto the DSPs in your PowerCore system. There are three options:

Adjust for least host CPU consumption

Chose this setting if you experience clicks or dropouts.

High compatibility mode

This is the default setting and it will work perfectly for most setups.

Adjust for most Plug-Ins

This is the ideal setting if you use many small and low CPU consuming plug-ins.

SYSTEM SETUP - Buffer Multiplier

If you experience host CPU spikes you may need to increase the PowerCore’s buffer size. The buffer multiplier increases your soundcards buffer setting by a factor 1,2,3 or 4. Increasing the buffer multiplier results in increased latency and should therefore only be increased if CPU spikes actually occur.

E N G L I S H

22 / POWERCORE POWERCORE / 23