Tascam US-122L owner manual Connections, USB connections, Audio connections, Mic

Page 14

5 – Connections

USB connections

Using the included cable, connect the US-122L to your computer as shown in the illustration.

Computer

NOTE

Some USB devices access the USB bus frequently. To avoid dropouts and clicks in the audio signal, we strongly recom- mend that you do not connect other USB devices to the USB bus used by the US-122L.

USB keyboards and mice are exceptions to this, and will probably not cause problems.

USB

Audio connections

Connect the output signal of your mic, gui- tar, keyboard, or other audio device to the US-122L, where it will be converted into digital audio and sent via USB to your computer. Connect the output of the US-122L to your speakers (via an amp) or headphones, so you will be able to monitor the audio signals coming into the US-122L or being produced by your computer.

NOTE

The US-122L has two input channels (L, R), with a MIC IN jack (XLR) and LINE IN jack (1/4” phone jack) provided for each channel. Do not connect signals to both of these analog input jacks at the same time. If both are connected, the signal will not be correctly input to the US-122L.

Mic

Connect your mics to the MIC IN (L, R) jacks (XLR). If you are using a condenser mic that requires phantom power, turn on the phantom power.

If you're using a condenser mic

14 TASCAM US-122L

Page 13 Page 15
Image 14
Page 13 Page 15
Contents US-122L Important Safety Precausions Important Safety Instructions Contents Introduction FeaturesWhat is in the package OverviewConventions used in this manual Parts of the US-122L Top panelRear panel Front panel Windows XP InstallationSystem requirements Mac OSInstallation procedure Installing the driversInstalling the drivers for Windows XP Installing the drivers for Mac OS Installing Cubase LESettings on your computer Setting section Control panel settingsDriver settings Status sectionAudio connections ConnectionsUSB connections MicAnalog record player Speakers/headphonesGuitar Midi connections Input setting Recording with Cubase LERecording Mixdown From the File menu, choose Export Audio MixdownTroubleshooting Cannot set the locator region to more than ten min- utesSound is distorted Midi Implementation Chart Function Transmitted Received RemarksSpecifications and performance Audio specificationsOther characteristics Audio performancePhysical characteristics DimensionsTascam US-122L Specifications and performanceNotes US-122L
Top Page Image Contents