Velodyne Acoustics VX-10 owner manual Product Features, Prepare for Installation, Placement

Page 6

Product Features

10" (8.5" piston diameter) subwoofer with 2.0" high-temp voice coil and 40 ounce motor structure

Adjustable (50 to 200Hz) low-pass crossover

Line-level (RCA) inputs

Speaker-level inputs and outputs with spring loaded terminals

Signal sensing auto turn on/off

Variable volume control

Selectable phase control (0 ° or 180° )

Frequency response of 36 - 120 Hz (+/- 3dB)

Low-pass crossover @ 12dB/octave

Green power on/ Red power standby mode indicator LED

Prepare for Installation

Your new Velodyne subwoofer provides for a number of installation options. Read all the installation information below in order to determine which installation option is best for your system. Remember to perform

all installation procedures with system power turned off to prevent possible damage.

Placement

True subwoofers operate at extremely low frequencies which are primarily omnidirectional. Keep in mind that frequency response and output level can be drastically influenced by placement, depending on the acoustic properties of the listening room. Typically, the optimum location for a subwoofer is tucked away in a corner of your listening room. This location will usually offer the greatest output levels and optimum low frequency extension. The worst location for a subwoofer is typically far away from any walls, and close to the center of your room. Avoid these locations when possible. When using a pair of Velodyne subwoofers in stereo, it is preferable to place each subwoofer by the satellite of the same channel.

Caution! This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture, such as evaporative coolers, humidifiers, etc. The power cord should be routed in such a way that it will not be walked on, pinched, or compressed in any way that could result in damaging the insulation or wire.

5

Image 6
Contents VX-10 Important Safety Instructions Vorsicht Importantes Consignes DE Securite Prior to installation CongratulationsProduct Features Prepare for InstallationPlacement Installation Volume ControlInputs Auto turn on function Phase adjustment 0/180Low-pass crossover 50 to 200Hz SubwooferoutputsSpeaker Line-level Connections Subwoofer OutputsVOLUMELEVELknob Power indicatorPhase switch Power switch 230V model onlySpeaker-level Connection Interconnect CablesCare of Your Subwoofer Line-level subwoofer connection diagram Speaker-level subwoofer connection diagram Troubleshooting and Service Protection CircuitryThank you for purchasing a Velodyne VX-10 Subwoofer Online Other Velodyne Subwoofer Products Page Page Velodyne Acoustics, Inc

VX-10 specifications

The Velodyne Acoustics VX-10 is a high-performance subwoofer that embodies cutting-edge design and technology, delivering a superior audio experience for both home theater enthusiasts and music lovers. Known for its compact size and powerful output, the VX-10 is an excellent choice for those seeking deep, impactful bass without sacrificing valuable living space.

One of the primary features of the VX-10 is its 10-inch, long-throw driver. This driver is engineered to produce low-frequency sounds with exceptional accuracy, allowing it to reproduce bass tones in their full depth and richness. Coupled with this driver is a custom-designed amplifier that delivers 300 watts of dynamic power. This robust amplification ensures that the subwoofer can handle bursts of bass and maintain clarity even at high volumes.

Another notable aspect of the VX-10 is its advanced Digital Signal Processing (DSP) technology. This system optimizes performance by filtering and shaping the audio signal to minimize distortion and enhance sound quality. The DSP also provides controls that allow users to adjust the subwoofer’s response according to their room acoustics, ensuring that the performance fits seamlessly into any environment.

The VX-10 features a sleek and modern design, making it an attractive addition to any home audio setup. Its compact cabinet enhances its versatility, allowing it to easily blend in with furniture while still providing powerful performance. The enclosure is constructed from high-quality materials that reduce vibrations and resonance, ensuring that only pure bass is delivered.

Connectivity options are abundant with the VX-10, offering both line-level and speaker-level inputs. This versatility allows it to integrate smoothly with a wide range of audio components, including receivers, amplifiers, and media players. Additionally, its phase control and variable crossover settings enable users to fine-tune their audio experience, achieving the perfect balance with their main speakers.

In summary, the Velodyne Acoustics VX-10 subwoofer stands out for its impressive combination of power, technology, and design. With its 10-inch long-throw driver, powerful amplifier, advanced DSP technology, and comprehensive connectivity options, it offers an exceptional solution for anyone looking to enhance their audio enjoyment. Whether for home theater use or music playback, the VX-10 delivers deep, accurate bass that truly elevates the listening experience.