Roberts Radio RC9907 manual Setting the clock

Page 10

Setting the clock

1.Press the Set button six times, the display will show the hours digit.

2.Press the Mode button until the required hour is displayed.

3.Press the Set button, the display will show the minutes digit.

4.Press the Mode button until the required minute is displayed.

5.Press the Set button to return to the normal clock display.

6.Press the Mode button to start the clock at the selected time. The colon between the hours and minutes digit will flash showing that the clock is running.

Note : When setting the hours digit pressing and holding down the mode button until the hours digit has gone through midnight will change the clock to 24hr mode, this is indicated by the letter 'H' after the hours digit. To change back to 12hr mode repeat the procedure. 12hr mode is indicated by the letter 'A' for AM or 'P' for PM after the hours digit.

Alarm off Mode

Set

 

 

Alarm off Mode

Set

 

 

Alarm off Mode

Set

 

 

Alarm off Mode

Set

 

 

Alarm off Mode

Set

 

 

Alarm off Mode

Set

 

 

Alarm off Mode

Set

 

 

9

RC9907 Issue 3.pmd

10

1/26/2007, 1:35 PM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents RC9907 Controls Top Right side Controls Front Battery operation Mains operationListening to the radio FM operation WavebandMedium and long wave operation WavebandListening to cassette tapes Close the Cassette compartmentBeat cut switch Recording from the RadioRecording from the Internal Microphone Setting the clock Setting the date Setting the alarm timeSetting the alarm to wake to buzzer Setting the alarm to wake to radioActivating the hourly alarm Making a timed recordingDisplaying the date Displaying the alarm timeDisplaying the seconds Headphones socket Preventing accidental erasureCleaning the Heads GeneralMains supply Trouble shootingFuse Specifications Circuit Features Power RequirementsGuarantee Roberts Radio Technical Services Department
Top Page Image Contents