Settings You can Change with the User Tools
Tray Paper Settings
Menu | Description | |
|
| |
Tray1: Paper Type | You can specify the types and size of the copy paper set in | |
Tray2: Paper Type | the paper tray and make them indicated. | |
You can set with the following steps. | ||
Tray3: Paper Type | ||
A Paper Type | ||
Tray4: Paper Type | ||
B Paper Color (Only for “Special Paper” or “Thick Paper”) | ||
Tray5: Paper Type | ||
C Slip Sheet Copy In Duplex Mode (Only for “Normal” | ||
Tray6: Paper Type | ||
“Recycled Paper” or “Special Paper”) | ||
| ||
| D Paper Size (Only for Tray 2 and Tray 3) | |
|
| |
| 1. Paper Type | |
| • You can set only 1 type of copy paper in each paper tray. | |
| • When specifying, the following indications are dis- | |
| played. | |
| “Recycled Paper” when recycled paper is specified. | |
| “Special Paper” when special paper is specified. | |
| “OHP Sheet” when OHP sheet is specified. | |
| “Translucent Paper” when Translucent paper specified. | |
| “Thick Paper” when thick paper is specified. | |
| “Tab Stock” when index tab paper is specified. | |
| • You can set the amount of copy shift on when Tab Stockis | |
| set in the tray. The Tab Stock can be set only in tray 4 or | |
| tray 5. You can set the amount of shift from 0 to 15mm (in | |
| 1mm steps), 0.0" to 0.6" (in 0.1" steps). | |
| • You can specify the “Thick Paper” with “Tab Stock” at | |
| the same time. In this case, you cannot punch on the in- | |
| dex tab paper. |
Note
❒Default:
•Metric version: 13mm
•Inch version: 0.5"
•You can set “Translucent Paper” and “Tab Stock” only in Tray 4 and Tray 5.
2. Paper Color
•When specifying “Special Paper” or “Thick Paper”, you can select the color from the following 12 options.
•1.None 2.Yellow 3.Green 4.Blue 5.Purple 6.Ivory 7.Or- ange 8.Pink 9.Red 10.Gray 11.User Colour Paper 1 12.Let- terhead
Note
❒Default: None
1
17