User Tools (System Settings)
Settings You Can Change with the User Tools
Reference
For how to access the user tools, see P.15 “User Tools Menu (System Settings)”.
2
System Settings
Menu | Description |
|
|
1.Function Priority | You can specify the mode (Copier, Fax or Printer) to be displayed |
| immediately after the operation switch is turned on or System Re- |
| set mode is turned on. |
| Note |
| ❒ Default: Copier |
|
|
2.CopyCount Display | The copy counter can be set to show the number of copies made |
| (count up) or the number of copies remaining to be made (count |
| down). |
| Note |
| ❒ Default: Up |
|
|
3.System Reset | The machine returns to its prioritized mode automatically after |
| your job is finished, when you selected the time. This function is |
| called “System Reset”. The time can be set from 10 to 999 seconds, |
| or no system reset. |
| Note |
| ❒ Default: On (60 seconds) |
| ❒ You can specify the prioritized mode with the user tools. See |
| “1.Function Priority”. |
|
|
4.Energy Saver Timer | The machine enters Low Power mode automatically after your job |
| is finished, after the selected time. The time can be set from 1 to 240 |
| minutes. |
| In Low Power mode, power consumption is reduced by 30% com- |
| pared with Standby mode. This value applies to Copier features |
| only. |
Note
❒Default: 15 minutes
❒Energy Saver might not be effective when an error message is displayed.
❒When the machine receives a fax or printer data in Energy Sav- er mode, it automatically prints the fax or the printer data.
16