Savin 2575, 2565 specifications Copying from the Bypass Tray

Page 32

Copying

Copying from the Bypass Tray

 

Use the bypass tray to copy onto spe-

 

cial paper (OHP transparencies, label

 

paper, adhesive labels), thick paper

 

(postcards and thin paper), and copy

 

paper that cannot be loaded in the pa-

2

per trays.

Preparation

When copying from the bypass tray, select [1 Sided1 Sided] for copying in [Dup./Combine/Series]. You can change the initial settings. ⇒ p.99 “Duplex Mode Priority”

Important

When paper larger than 433 mm in size is used, it may become wrin- kled, may feed into the machine, or may cause jams.

When copying onto special paper,

such as adhesive labels, be sure to select “Face up” in ⇒ p.108 “Eject Copy Face Up/Down in Bypass Mode”. If you select “Face Down”, a paper misfeed may occur.

Note

The sizes of paper you can use with the bypass tray are as follows.

Metric

• Vertical: 100 – 305 mm

version

• Horizontal: 139.7 – 600 mm

 

 

 

Inch

Vertical: 3.9" – 12.0"

version

Horizontal: 5.5" – 23.6”

 

 

 

The machine can automatically de- tect the following sizes as standard size copy paper.

Metric

A3L, A4L, A5L, 100 ⋅ 148

version

mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inch

A3

L

, 11"

L

1

/2"

version

 

17"

 

, 8

 

14"L, 51/2" ⋅ 81/2"L, 100 ⋅

 

148 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you want to use the size of paper

other than ones in the above table, be sure to specify the size. ⇒ p.23

“When copying onto standard size paper”, ⇒ p.79 “Program”

When copying on OHP transpar-

encies or paper heavier than 105

g/m2 (about 27.9 lb.), you need to specify the paper type. ⇒”Paper Type”in the General Settings Guide

If you want copies to be delivered face down when placing originals on the exposure glass, select “Face down” for both ”Eject Copy Face Up/Down in Glass Mode” and “Eject Copy Face Up/Down in By- pass Mode” of User Tools.

If you have selected OHP transpar- encies or thick paper paper in “Special paper”, you cannot have copies delivered face down.

If you use label paper, you cannot have copies to be delivered face down.

If you use paper larger than 432 mm, 17” in size, you cannot make copies to be delivered face down.

The maximum number of sheets you can load into the bypass tray depends on paper type. The num- ber should not exceed the upper limit.

22

Image 32
Contents Copy Reference UE USA B064-6607 Page Means Power ON. c means Stand by What You Can Do With This Machine Types of Duplex CopiesCopying Book Originals Sided Copying Originals Such as BooksSeries Copies Table of Contents Programs Copying Book OriginalsCombination Chart 109 Supplementary Specifications 111 125How to Read this Manual SymbolsPreparation LimitationMachine Types Functions that Require Options Control Panel Common Key Operations Sample Copy keyStart key Clear/Stop keyPage Sizes and Weights of Recommended Originals OriginalsMetric version Inch versionSizes Detectable by Auto Paper Select Exposure glass Document feeder Sizes difficult to detectMm or more, 0.04 or more Mm, 0.08 Missing Image AreaMm 3.5 mm, 0.02 Direction-fixed paper or 2-sided paper Placing Originals Original OrientationDocument feeder Exposure glass Press the Special Original keyWhen placing originals one by one When copying originals of various sizesWhen placing custom size originals When placing originals consisting of more than 100 pagesBatch mode Select the Batch key, and then press the OK keyPress the Mixed size key, and then press the OK key Sadf modeMixed Size mode Placing Custom Size Originals Start key Press the Custm Size Origi. keyBasic Procedure When clearing entered valuesTo confirm settings Initial copy displayWhen the machine keeps copying When the originals stop scanningAuto Start Interrupt CopyJob Preset Editing Job PresetCopy Face Up Press Face Up key Place originals, and then pressTo check job contents To change job contents after checkingTo delete a job after checking its contents Deleting a Preset JobOriginals Copying from the Bypass Tray Select the type and size of the pa- per When copying onto standard size paperWhen copying onto custom size paper When copying onto special paper Copy Functions Auto image densityManual image density Combined auto and manual image densitySelecting Original Type Setting Manual Paper Select Selecting Copy PaperAuto Paper Select When the paper type keys are not displayed Auto Paper SelectManual Paper Select Press the Auto Paper Select keyRotated copy Press the Enlarge or Reduce key Preset Reduce/EnlargeBase Point Zoom To select a ratio with the n KeysPress the Reduce/Enlarge key Enter the ratioPress the Auto Reduce/Enlarge key Auto Reduce/EnlargeTo enter a ratio with the number keys Press the Reduce/Enlarge key Press the Specifd. Ratio key Size MagnificationDirectional Magnification % Directional Size Magnification mm To specify a ratio with the n and o keysRotate Sort SortSort When a finisher is not installed When the Booklet Finisher is installedShift Sort Press the Sort or Rotate Sort keyStack StapleFinisher 3000B100-sheet staples Finisher 3000B100-sheet Staples, Finisher 3000M50-sheetStaples Booklet FinisherPress the Change Quantity key Sample CopyChanging the Number of Sets Punch HolesPunch hole positions Originals and Copy Direction DuplexSided → 2 Sided Press the Dup./Combine/Series Sided Combine Sided, 1 Page → Combine 1 SideSided, 2 Pages → Combine 1 Side Sided, 4 Pages → Combine 1 SidePlacing Originals Originals Placed in the Document Feeder Orientation of the Original and Image Position of CombinePress the Dup./Combine/Series key Sided, 16 Pages → Combine 2 Side Sided, 4 Pages → Combine 2 SideSided, 8 Pages → Combine 2 Side Sided, 4 Pages → Combine 2 SideSided, 16 Pages → Combine 2 Side Series CopiesBook → 1 Sided Press the Series/Book key Book → 2 SidedFront & Back → 2 Sided Sided → Booklet Sided→1 SidedCopying Book Originals Sided → Magazine Open to RightHow to fold copies to make a booklet How to fold and stack copies to make a magazineOpen to Left Open to RightImage Repeat Original A5K/Copy paper A4K Or Original A5L/Copy paper A4LOriginal A5K/Copy paper A4L Or Original A5L/Copy paper A4KDouble Copies Scanning Position Point where the machine starts scanningCentering Press the Scan Position key EraseBorder Center Center/BorderOutside Border EraseSelecting Same Width Selecting Diff. WidthCenter Erase Set the border to be erased from of the backCenter/Border Erase Press the Diff. Width key Press the Erase keySet the border to be erased Set the center or border to be erased from the backInside Erase Outside ErasePress the Erase Inside 1 or Erase Inside 2 key Press the Erase Outside keyEdges Full Bleed Press the 3 Edges Full Bleed keyMargin Adjustment Preset Stamp Background NumberingPress the Edit/Stamp key Press the Stamp key Press the Background NumberingChanging stamp position, size and density Stamp Position and Original DirectionUser Stamp Stamp position and original orientation ReferenceFeatures key To change the stamp positionTo program the user stamp Press the Program/Delete StampTo delete the user stamp Press the Exit keyDate Stamp Stamp position and original orientationNumbering To change the date formatPress the All Pages or 1st Press the Change Format keyStamp position and orientation of originals Changing the stamp position Specify the first printing page and start numberIf you selected P1,P2…, -1-,-2-…, P.1, P.2…, 1, 2… Press the Print Inquiry List orIf you selected 1/5, 2/5… If you selected 1-1, 1-2,…Press the right bottom Change key Enter the original sheet number to start numbering fromFront/Back Covers CoversFront Cover Designate Press the Cover/Slip Sheet keyPress the Cover/Slip Sheet key Press the Desig./Chapter key Press the Next Chapter keyChapter Press the Insert Sheet key Blank Slip SheetsPress the key to select the chapter number When using OHP transparencies set on the bypass tray Slip SheetsPress the Stored File key Make scanning settings for the original Press the Start keyStoring Originals in the Document Server

2575, 2565 specifications

Savin 2565 and 2575 are advanced multifunctional printers recognized for their speed, reliability, and high-quality output. Designed primarily for office environments, these models cater to businesses seeking efficiency and productivity. Both printers feature a sleek design that fits seamlessly into any workspace, boasting a compact size while offering a robust array of functionalities.

One of the standout features of the Savin 2565 and 2575 is their impressive print speed. The 2565 can produce up to 65 pages per minute, while the 2575 enhances productivity even further with a speed of 75 pages per minute. This rapid output is crucial for busy offices that require high-volume printing without sacrificing quality.

Both models incorporate advanced print technology that ensures sharp and vibrant images. With a resolution of up to 1200 x 1200 dots per inch, users can expect exceptional clarity in both text and graphics. This level of detail makes these printers ideal for producing professional-quality documents, marketing materials, and presentations.

Another key characteristic of the Savin 2565 and 2575 is their multifunctionality. They combine printing, copying, scanning, and faxing capabilities into a single device, significantly saving space and reducing the need for multiple machines. This integration is particularly beneficial for small to medium-sized businesses aiming to streamline their operations and minimize overhead costs.

The user-friendly interface features a large color touchscreen display that simplifies navigation through settings and options, enhancing overall usability. Additionally, the printers support various paper sizes and formats, accommodating diverse printing needs from standard documents to larger formats.

Connectivity options are robust, offering both wired and wireless capabilities. Users can easily print from various devices, including smartphones and tablets, enhancing flexibility in a fast-paced work environment. The printers also support mobile printing solutions, allowing for convenient and quick print jobs on the go.

In terms of energy efficiency, the Savin 2565 and 2575 are designed to be environmentally friendly. With features like low energy consumption during operation and sleep mode, they contribute to reduced overall energy costs. Furthermore, the devices utilize high-yield toner cartridges, which not only lower the frequency of replacements but also minimize waste.

Overall, the Savin 2565 and 2575 stand out as powerful, versatile, and efficient solutions for modern office print needs, combining speed, quality, and sustainability to meet the demands of today's business environment.