Velocity Micro MS-3 manual Setting the Use linked location

Page 22

18

Chapter 1: Introduction

Microscan MS-3 Laser Scanner Device Driver User Guide

Setting the Use linked location

3.Some software device drivers only. Set the Approach height and

Allowed/prohibited labware. Follow the procedure in “Setting general properties” on page 16.

4.Set the Barcode Readers location. Follow the procedure in “Setting barcode location” on page 17.

5.Assign the Labware used by the location by selecting the correct labware type from the list.

6.In the Device Properties, select the desired profile if it is not already selected.

7.Select File > Device File > Save to save the changes to the device file.

Currently, this feature is enabled for the special situations in which there is a storage device such as a PlateHub Carousel, StoreX, or Cytomat and a robot, such as the Velocity11 Translator robot that is shuttling plates between systems.

To use this feature, select yes and then select the device location to which you want to link. This tells the software that the current device location is the same physical location as the device selected from the Device to use list.

Note: Selecting this option when it is not enabled will have no effect on the system.

Related topics

For information about...	See...

Device drivers	“About device drivers” on page 7

Installing a device driver plug-in	“Installing device drivers” on page 9

Profiles	“About profiles” on page 15

Adding a device to the device	“Adding devices” on page 10
manager

Opening diagnostics	“Opening diagnostics” on page 12

Image 22

Contents Microscan MS-3 Laser Scanner Device Driver User Guide July VWorks3 and BenchWorksCopyright 2007 Velocity11 Contents Table of Contents Introduction1 Job roles Who should read this guideRelated topics About this topic Where to find user information Online helpAbout Velocity11 user guides To open the online helpPrinting and searching More information Driver version What this guide coversAlso read What this guide does not coverDevice defined About devicesDevice file defined About device drivers IWorks interface What functions do the device drivers provide? Related topicsProcedure Installing device driversTo install device drivers Adding devices To add devices to a device fileAbout diagnostics BackgroundOpening diagnostics To open DiagnosticsIf you are using VWork3 or BenchWorks software Related topics About profiles Stored settingsProfiles defined Before you start Setting general properties Setting the properties for a deviceTo set the general properties for a device To set the teachpoint properties Setting teachpointsSetting location properties To set the barcode readers propertySetting the Use linked location Sub Process task defined Adding a Sub Adding and linking Sub Process tasksTo link the Sub Process task to the correct sub-process To link a Sub Process task to a device Using JavaScript to set task parameters Where scripts are writtenAbout reader output files Plug-in defaultOutput file Profile default output file name Filename suffixes ExampleOverriding output file names with tasks Homing motors Setting profile parameters About device initializationIntroduction Microscan MS-3 Laser Scanner Workflow for configuring the Microscan MS-3 Laser WorkflowBefore you start Creating a Microscan MS-3 Laser profileTo create an Microscan MS-3 Laser profile Setting Microscan MS-3 Laser task parameters About Microscan MS-3 Laser tasksTo set the Scan bar code task parameters Scanning a barcode To scan a barcode Operating the Microscan MS-3 Laser with diagnosticsTo initialize the Microscan MS-3 Laser Managing Microscan MS-3 Laser profiles Managing profiles To manage Microscan MS-3 Laser profilesRelated topics