Velodyne Acoustics SPL-800i user manual Risk of Electric Shock Do not Open

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution

NOTES:

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the subwoofer.

1.Read Instructions — All safety and operating instructions should be read before the subwoofer is operated.

2.Retain Instructions — The safety and operating instructions should be retained for future reference.

3.Heed Warnings — All warnings on the subwoofer and in the operating instructions should be adhered to.

4.Follow Instructions — All operating and use instructions should be followed.

5.Water and Moisture — The subwoofer should not be used near water — for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool or the like.

6.Carts and Stands — The subwoofer should be used only with a cart or stand recommended by the manufacturer.

7.Wall or Ceiling Mounting — The subwoofer should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation — The subwoofer should be situated so that its location or position does not interfere with its proper ventilation. For example, the subwoofer should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat — The subwoofer should be situated away from heat sources such as radiators, heat registers, stoves, or other subwoofers that produce heat.

10.Power Sources — The subwoofer should be connected to a power supply only of the type described in the operating instructions or as marked on the subwoofer.

11.Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the subwoofer.

12.“Caution: To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.”

13.Cleaning — The subwoofer should be cleaned only as recommended by the manufacturer.

14.Nonuse Periods — The power cord of the subwoofer should be unplugged from the outlet when left unused for a long period of time.

15.Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled onto the enclosure.

16.Damage Requiring Service — The subwoofer should be serviced by qualified service personnel when:

a.The power-supply cord or plug has been damaged.

b.Objects have fallen or liquid has been spilled into the subwoofer.

c.The subwoofer has been exposed to rain.

d.The subwoofer does not appear to operate normally or exhibits a marked change in performance.

e.The subwoofer has been dropped or damaged.

17.Servicing — The user should not attempt to service the subwoofer beyond what is described in the operating instructions.

18.The apparatus shall not be exposed to dripping or splashing water and that no objects filled with liquids, such as vases be placed on the apparatus.

19.The disconnect device (the appliance inlet) shall remain readily operable (easily assessable).

All other servicing should be referred to qualified service personnel.

Image 2
Contents SPL-800i Risk of Electric Shock Do not Open Congratulations Prior to InstallationProduct Features Prepare for Installation PlacementInputs InstallationVolume Control Low-pass Crossover 40 to 120 HzTroubleshooting and Service Subwoofer DirectCare of Your Subwoofer Subwoofer OutputsInterconnect Cables LINE-LEVEL Connection Option aSPL-800iTM Protection CircuitryLINE-LEVEL Connection Option B Speaker Level InputInstallation Using Stereo Line-Level Inputs SPEAKER-LEVEL Connections

SPL-800i specifications

The Velodyne Acoustics SPL-800i is a highly regarded subwoofer that exemplifies performance excellence in home audio systems. Known for its powerful bass response and intelligent design, it enriches the listening experience by providing deep, impactful low-frequency sound without compromising clarity.

One of the defining features of the SPL-800i is its innovative DSP (Digital Signal Processing) technology. This sophisticated system optimizes the sound output, ensuring that the subwoofer reproduces low frequencies accurately across various music genres and types of audio content. The DSP-enabled design facilitates seamless integration with other speakers, creating a cohesive sound stage that enhances overall audio enjoyment.

The SPL-800i is equipped with an 8-inch downward-firing driver. This configuration not only maximizes the efficiency of the low-end response but also minimizes distortion, resulting in clean and precise bass output. The driver's robust construction ensures durability while delivering powerful performance capable of shaking the walls without losing musical fidelity.

Another notable characteristic of the SPL-800i is its compact form factor. Designed to fit easily into various home environments, it measures a modest size, making it a versatile choice for both small and large rooms. Despite its size, the subwoofer manages to deliver impressive power, with a built-in 300-watt amplifier that drives its performance.

The SPL-800i also features an adjustable phase control, allowing users to match the subwoofer output to their room acoustics and listener location. This customization enhances the overall sound quality and makes the subwoofer adaptable to different setups, whether in a dedicated home theater or a multi-purpose living area.

Further enhancing user experience, the SPL-800i includes automatic room equalization that helps in calibrating the subwoofer to its environment. This advanced technology assesses the space and adjusts its performance to eliminate unwanted frequencies, ensuring the best bass reproduction possible.

In summary, the Velodyne Acoustics SPL-800i stands out in the realm of subwoofers thanks to its unique blend of advanced technologies and thoughtful features. With its DSP technology, powerful driver, compact design, and room calibration capabilities, it remains a top choice for audiophiles looking to enrich their home audio experiences with deep, professional-grade bass.