8.Double click ‘Internet Protocol (TCP/IP)’ that you want to use on your computer.
9Check ‘Use the following IP address’, and write ‘IP address’ & ‘Subnet mask’ that you want to use.
For example,
IP address: 192.168.1.3
Subnet mask: 255.255.255.0
✓If you have already been provided dynamic IP address from DHCP Server or IP Router on your local area network, you don’t need to input IP address.. Use ‘Obtain an IP address automatically’.
10. Set the network configurations of Mediastation.
✓You have to connect MEDIASTATION to TV set for this setup. See “3.1.1 Connect Video Cable”.
Press [SETUP] of remote control for moving to setup screen. On that screen, select ‘DHCP off’ and write IP address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After writing, press [SETUP] again for saving configurations.
✓If you have already been provided dynamic IP address from DHCP Server or IP Router on your local area network, you don’t need to write static IP address absolutely. Use ‘DHCP on’ or write IP address & Subnet mask that DHCP Server or IP Router provide.
✓Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address in MENU screen after selecting
<Mediastation IP Address>
8