Snooze/Alarm Reset
Using the SNOOZE/RESET function
There are three ways of switching off the alarm – (Snooze, 24 Hour Alarm Reset, Canceling the Alarm.)
However, if the alarm is not turned off after at the end of the alarm cycle, it will continue to operate for approximately 30 minutes (then turn off automatically).
1. SNOOZE
This restarts your alarm cycle after a
•To activate, during the alarm, tap SNOOZE/RESET button. Note: alarm will begin again at the dimmest/quietest setting and run for the entire wake cycle.
2. 24 HOUR ALARM RESET
If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day:
•For Sound only and Sound & Light mode: Press and hold the SNOOZE/RESET during the alarm cycle until the sound goes off and the “Alarm On” icon on the display stops flashing.
•For Light Mode only: Press and hold the SNOOZE/RESET during the alarm cycle until the “Alarm On” icon on the display stops flashing.
In either case, the light must be turned off manually by pressing the light switch button.
3. CANCELING THE ALARM COMPLETELY
To cancel the set alarm modes entirely:
•Press the WAKE button until there is no WAKE alarm option (Light, Sound) illuminated.
IMPORTANT – If the LIGHT or LIGHT & SOUNDS alarm mode is selected, the light will remain on at the level when the SNOOZE/RESET button is activated. To turn the lamp off, press the light switch button
14