11 ./CLR — This key has three functions:
•press to input a decimal point when you enter a frequency.
•press to cancel a number button input - 0 to 9.
•press to clear an error display.
12 “Soft” Buttons — Functions for these 5 buttons depend on the current mode. The
13 MODE Switch — Use to select the desired mode: AM/FM; Weather; Scanner. (Slide switch must be set to Clock)
14 ▼ — Press and release to move down through channel numbers in the following HOLD modes: SCAN, PROGRAM, SERVICE SEARCH, and WX or the step frequency in LIMIT SEARCH, and AM/FM mode. (Refer to the frequency and step table on page 10.)
Press and hold for more than 1 second to have the changes run continuously.
15 ▲ — Press and release to move up through channel numbers in the following HOLD modes: SCAN, PROGRAM, SERVICE SEARCH, and WX or the step frequency in LIMIT SEARCH, and AM/FM mode. (Refer to the frequency and step table on page 10.)
Press and hold for more than 1 second to have the changes run continuously.
16 Headphone Jack — Lets you use an headphone for private listening.
17 External Alert Terminal — Connect a
18 AM Loop Antenna — Connect the supplied loop antenna and position it for best AM Broadcast radio reception.
19 Antenna Connector — Connect an external antenna using a BNC connector.
Introduction
15