Pr epar e for Installation, Placement | Velodyne Acoustics 1200

Pr epar e for Installation

Your new Velodyne subwoofer provides for a number of installation options. Read all of the installation information below in order to determine which installation option is best for your

system. Remember to perform all installation procedures with system power turned off to prevent possible damage.

Placement

The first step in installing your new SPL-Ultra sub is to determine where it will be placed in the room. Unpack the system carefully and use the following guidelines in order to find the best room placement option.

True subwoofers operate at extremely low frequencies which are primarily omni-directional. Keep in mind that frequency response and output level can be drastically influenced by placement, depending on the acoustic properties of the listening room. To obtain the best output from your subwoofer, try placing it within a foot of a corner. This location will offer the greatest output levels and maximize low frequency extension. If at all possible, your subwoofer should be placed along a wall. The worst location for a subwoofer is typically far away from any walls and close to the center of your room. Avoid these locations when possible. When using a pair of Velodyne subwoofers in stereo, it is preferable to feed each subwoofer with one channel and place each subwoofer near the satellite of the same channel.

Depending on the size and type of furnishings in the room, perfect placement may not be possible. Finding the best location within your environment will likely require some experimentation. We suggest you experiment with the location during setup to find what sounds best to you when seated in your typical listening position.

Regardless of where you install your Velodyne subwoofer, it must remain in an upright position (woofer facing forward). Using, shipping or storing the subwoofer in any other position for an extended period of time may result in damage to the unit not covered by warranty.

Caution!

This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture such as evaporative coolers, humidifiers, etc. The power cord should be routed in such a way that it will not be walked on, pinched or compressed in any way that could result in damage to the insulation or wire.

Although the Velodyne SPL-1000 Ultra and the SPL-1200 Ultra are magnetically shielded, the SPL-800 Ultra subwoofer is NOT magnetically shielded. Should you find it necessary to use it with an older CRT monitor or TV, keep it at least two feet from the monitor. Experiment for correct distance by minimizing distortion of the picture and colors.

.w w w . v e l o d y n e . c o m

SPL-Ultra User’s Manual

1200, 1000, 800 specifications

Velodyne Acoustics has long been a pioneer in the field of high-performance audio solutions, and their latest lineup of subwoofers, the Velodyne Acoustics 1000, 800, and 1200 series, exemplifies this legacy. Each model is engineered to deliver exceptional sound quality and deep, impactful bass for audiophiles and home theater enthusiasts alike.

The Velodyne Acoustics 1000 is designed to provide a balanced blend of power and precision. It features a 10-inch long-throw dynamic driver that ensures a rich bass response across a wide frequency range. The built-in amplifier generates up to 300 watts of peak power, making it capable of filling even large rooms with robust sound. The 1000 series also includes sophisticated DSP technology, which allows for automatic room tuning, enabling users to optimize performance according to their specific listening environment.

Moving on to the Velodyne Acoustics 800, this model is more compact but does not compromise on performance. Featuring an 8-inch driver, it is ideal for smaller spaces while still delivering impressive bass reproduction. The 800's amplifier can produce up to 200 watts of peak power, optimizing both performance and efficiency. This model utilizes Velodyne's innovative Auto EQ technology, which adjusts the subwoofer's settings to seamlessly blend with other speakers in a multi-channel setup, ensuring uniform sound dispersion throughout the room.

At the top of the range, the Velodyne Acoustics 1200 takes bass performance to new heights. With a powerful 12-inch driver and an amplifier capable of delivering 400 watts of peak power, this subwoofer is designed for users who demand ultimate bass impact. The 1200 series employs advanced low-frequency technology that minimizes distortion and enhances clarity, even at high volumes. It also comes equipped with a user-friendly interface, allowing for precise adjustments to suit any audio preference.

All three models feature stylish cabinet designs that will complement any home decor while utilizing high-quality materials for durability and resonance reduction. Moreover, each subwoofer offers various connectivity options, including RCA and speaker level inputs, ensuring compatibility with a range of audio systems.

In summary, the Velodyne Acoustics 1000, 800, and 1200 subwoofers embody the brand's commitment to acoustic excellence, each providing tailored solutions for different room sizes and audio preferences. With their cutting-edge technologies, impressive power ratings, and user-friendly features, these subwoofers continue to set the standard for home audio performance.