ViewEra V152 user manual Operation, Adjust the picture, Power on/off switch, Power LED indicator

Page 8

2.7Adjust the picture

In order to obtain the best visual display, you need adjust it, please refer to chapter 3 " the Operation of the monitor ".

3.Operation

OSD control panel

Fig.4 is elevation. Other models differ in key-press position and front panel.

3.1 Power on/off switch

This is a slight touch digital control key. It is used to turn the monitor on or off.

3.2Power LED indicator

When the monitor is working, the power LED is green or blue. If the monitor is in saving power mode, the power LED will be red and flashing . If you turn off the monitor, the power LED will be off. When the LED is off , the monitor is off, but the power adapter is on. For security, you should turn off power adpater while you don't use the monitor.

3.3OSD control keys

3.3.1 Auto key

This key is used to complete auto- adjusting function ,it make the monitor to be the best visual display status in VGA mode. This key is used to switch VGA and DVI signal in DVI mode.

3.3.2 +/- key

These two keys can complete the navigate right or left and choose the control of the menu function. The adjustment value can be set directly by +/- key.

3.3.3 key

Confirmation key can show the menu and complete the confirmation function.

6

Image 8 ViewEra V152 user manual Operation, Adjust the picture, Power on/off switch, Power LED indicator, OSD control keys
Contents 15/17/19TFT-LCD monitor Table of Contents Important Safety Instructions Page Features IntroductionGeneral Information Check the listInstalling the monitor PositionHighness InclinationSignal cable connection Power cord connectionPower on Audio cable connectionAdjust the picture Power on/off switchPower LED indicator OperationOSD menu (DVI Model )OSD Display contents Function ENG. English Safety mode Timing guideRecommended mode 1024×768@60Hz Specification Plug & Play12VDC Dead Pixel Policy For 1024X768, please set to XGA 1024 X 768 @75Hz