VIPowER VP-6228T user manual

Page 11

Step5.

a)Make sure the the 5.25” IDE device’s front face panel or the MobileRack’s front face panel should be flush with the front corners (positioned in front of the guide flanges) of the bottom enclosure cover.

b)Align the 5.25” IDE device or the Mobile Rack mounting holes with the mounting holes on the bottom cover and secure with four drive retaining screws (two on each side).

VP-6228(T) USER MANUAL

Image 11

Contents VP-6228T Proprietary Notice Contents Introduction Features and SpecificationsSpecifications USB 2.0 External Drive Analog Audio ConnectorJP1 Hardware InstallationOnly one jumper can be set at the same time Temperature Control Jumper Settings Only VP-6228TPage Place one 5.25 IDE Device in the bottom enclosure cover One 5.25 Device or Page Place the top enclosure cover over the drive assembly Page Page Page Page Proceed the following steps to connect to Your Computer Windows 98SE Drivers InstallationPage Page Page Mac OS Windows Me/2000/XPUsing The USB 2.0, 5.25 External Enclosure VP-6228T Doing SO MAY Result in Loss of Data Partition Under Windows 98/ME Partitioning the External USB 2.0 Hard DiskPage Partition under Windows 2000/XP