Video Products SE-HDMI-8-LC operation manual Specifications, Remote Controller

1.HDMI output: Connect the HDMI output to the HDMI input of your display using HDMI cable.

2.HDMI inputs: Connect your various HDMI sources to each of the HDMI input of the unit using HDMI cables.

3.Power: Plug the supplied 5VDC power supply into the unit.

4.RS232: 9-pin D-sub female connector for connecting to your other control console for remote control.

Remote Control

1. Power:

Press the button to turn on/off the unit.

2. Direct input selector:

Press numerical number button to select your desired input source.

3. Void buttons (No function). If the button number is greater than the total input number of the unit then the button is of no function.

Specifications

1

2

3

CR-22

*Frequency bandwidth: 1.65Gbps(single link)

*Inputs: 8 x HDMI female ports (Type A connector)

*Output: 1 x HDMI female port (single link)

*5VDC universal power supply

*Weight: 0.85kgs

*Dimension: 280(W) x104(L) x 44(H)mm

CHDMI-81 RS-232 Remote Control Protocol

*The connection between CHDMI-81 and remote controller with RS-232 modem cable. Pins definition of modem cable

	CHDMI-81						Remote Controller
PIN		Definition					PIN	Definition
1		NC		1				NC
2		T xD		2				R xD
3		R x D		3				T x D
4		NC		4				NC
5		GND		5				GND
6		NC		6				NC
7		NC				7		NC
8		NC					8	NC
9		NC			9			NC

*RS-232 transmission format: Baud Rate : 9600 bps Data Bit : 8 Bits

Parity: None

Stop Bit: 1 bi