Wells-Gardner Electronics Corporation
5.SET UP:
Setting up your monitor is easy. All you have to do is make a few simple connections and adjustments. The procedure is as follows:
5.1Start Up.
Your monitor starts up automatically when you insert the power plug to power source.
Connect the 15pin signal cable to the source and lock both screws to ensure that the monitor is properly grounded.
D type 15pin connector:
PIN NO. | DESCRIPTION | PIN NO. | DESCRIPTION |
1 | VIDEO RED | 9 | N.C. |
2 | VIDEO GREEN | 10 | GROUND |
3 | VIDEO BLUE | 11 | N.C. |
4 | N.C. | 12 | SDA |
5 | N.C. | 13 | |
6 | VIDEO RED GROUND | 14 | |
7 | VIDEO GREEN GROUND | 15 | SCL |
8 | VIDEO BLUE GROUND |
|
|
6