Wells-Gardner D9410 Series user manual Technical Features

Page 2

Wells-Gardner Electronics Corporation

Picture Tube.

Size: 27V Regular and Flat size to customer requirement

Dot Pitch: .83mm Signal Input.

Video Input: Analog, Positive Signal 4 / 2.2Volts CGA (0.7V p-p)VGA

Horizontal Sync: TTL Level, Positive or Negative Pulse

Scanning : 15.75 KHz-50KHz

Vertical Input: TTL Level, Positive or Negative pulse

Scanning : 40-100Hz Power Supply.

Power Input : 90-240 VAC, 50/60Hz

Fuse Rating: 250V, 3.15A

Power Consumption

Normal : less than 150W

OSD (On Screen Display) Control:

Operating Temperature: 0°C - 55°C

Operating Humidity: 10% - 90% (Noncondensing)

Net Weight : 17kg (37lbs) Standard frame

TECHNICAL FEATURES:

Microprocessor control with OSD (On screen display menu).

Microprocessor recognizes the input computer signal and signal output from the customer control board connected to the main board by a flat cable.

Universal AC Input Voltage.

Power supply operates on 90-240 VAC at 60/50Hz for use all over the world.

A (NO SIGNAL IN) message is displayed on the screen if no signal is present at the signal-input cable while the monitor is powered on.

Control panel.

If you require different display characteristics other than the factory mode presets of size, position, color settings, use the control panel to program it to your requirements in each resolution mode. These adjusted settings are kept in memory even if you change resolution mode or turn off the monitor.

Image 2
Contents D9400 D9410 Series Digital-Control Color Monitor Technical Features Start UP FeaturesSET UP User O.S.D. Control Adjustment Procedure . Brightness Adjustment Other OSD Adjustments OSD Menu and User FunctionsColor Adjustment User Preference Screen Color Color PreferenceLanguage Selection User Preference BOX will be Flashing REDTiming Chart VGAM3 VGA2Wells-Gardner Electronics Corporation Wells-Gardner Electronics Corporation