Wizcom 3 Lite user manual Pen Power Supply, Unpacking the Pen, Safety Points Batteries

Getting Started

The Pen Power Supply

The Pen comes with 2 AAA Alkaline batteries.

Safety Points (Batteries)

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use

AAAAlkaline batteries only.

•Always place 2 fresh batteries in the Pen. It is not advisable to use the Pen with batteries that are not at the same voltage level.

•Do not combine different types of batteries (e.g. rechargeable and non-rechargeable).

•Dispose of used batteries according to the manufacturer's instructions.

Preserving Battery Usage

To optimize battery usage, go to Set Auto Shut-Off Time in Preferences in the Pen Main Menu and modify the settings according to your needs.

Unpacking the Pen

To get started:

1.Remove the Pen from the protective case.

2.Lift the battery cover on the back of the Pen by pushing the tab down and out.

3.Insert the batteries into your Pen with the positive and negative terminals corresponding to the markings on the sides of the battery compartment.

4.Close the battery compartment.

5.Turn the Pen on by pressing the red Power key.

The Pen is ready to scan!

4