System Design

Corner Speakers:

TYPICAL REPLY DISTANCE CHART

V-1064A wood grain w/light brown open weave grille V-1065A wood grain w/dark brown cloth grille

10.50" H x 9.50" W x 6.30" D

(26.67cm H x 24.13cm W x 16.00cm D)

3.7lbs. (1.68 kg)

Corridor Speakers:

V-1066A wood grain w/light brown open weave grille V-1067A wood grain w/dark brown cloth grille

10.30" H x 10.30" W x 4.20" D (26.16cm H x 24.16cm W x 10.67cm D)

5.6lbs. (2.54 kg)

Machine

Shop90 (Noisy)

Shipping

(Moderate)70

Waiting

Rooms50 (Quiet)

Talkback not recommended above 80dB

10'

20'

30'

40'

50'

Maximum Talkback Reply Distance

Power Requirements

None, except V-1060B

V-1060B:45mA @ -24VDC max (for LED power)

Environment

Temperature:	-20 to +55oC
Humidity:	0 to 95% non-precipitating

General

The 45 Ohm Talkback Speakers are designed to be used with the Valcom "handsfree" talkback control units. In combination with these units, they will provide both loudspeaker and talkback functions.

A standard Valcom talkback paging system is made up of three basic components:

1.A talkback page control unit

2.Speakers (45 Ohm)

3.A power supply

Coverage

The distance you can be away from a speaker and still have good talkback depends on the type of speaker and the ambient noise level. In a typical office environment, a wall speaker (V-1061-W, V-1061-BK, V-1062A, V-1063A, V-1064A, V-1065A, V-1066A, V-1067A) will cover approximately 600 square feet when mounted eight feet from the floor. Ceiling speaker (V-1060A, V-1060B) coverage is dependent on ceiling height; the greater the ceiling height, the larger the area covered.

IMPORTANT

The speaker is no better than your ears. If you cannot carry on a conversation at normal voice levels over the required talkback distance, then the talkback page equipment will not function satisfactorily.

Use common sense when mounting a talkback speaker. The speaker should be as close as possible to the area where talkback is desired.

It should not be mounted close to or pointed at, noise producing equipment such as fans, air conditioners, machinery or compressors.

Limitations

Two talkback plus 40 one-way amplified speakers maximum per zone when mixing talkback and one-way paging.

800 feet maximum cable length to speaker from page control.

NOTE: Do not split pairs to speakers.

Do not use talkback in noisy areas (80dB or greater).

Valcom recommends that the total number of speakers per talkback zone be limited to two talkback and forty one-way self-amplified speakers. The reasoning behind this recommendation is simple. Whenever a page is made into a talkback zone, the paging party will hear audio from all of the talkback speakers in that zone. If a zone contains more than two talkback speakers, the talkback audio from the "extra" speakers will impede the quality of the talkback audio from the desired speaker. Additionally, there are limits to the number of talkback speakers that a page control will actually drive. Ideally, if a page were made into a talkback zone, all of the speakers would simply act like "one-way" speakers except for the one that is closest to the paged person.

V-1065A, V-1062A, V-1061-BK, V-1067A, V-1066A specifications

Valcom offers a series of powerful intercom and paging solutions designed for commercial applications. The V-1064A, V-1060A, V-1063A, V-1061-W, and V-1066A models showcase innovative features suitable for a range of communication needs.

The Valcom V-1064A is a ceiling-mounted speaker that integrates seamlessly into any environment. It features an 8-inch speaker, offering a broad frequency range for clear audio output. With a built-in amplifier that ensures adequate sound projection, the V-1064A is ideal for areas like classrooms and offices where clear communication is crucial. It supports both standard and emergency alerts, making it a versatile choice for safety protocols.

Next, the V-1060A model stands out for its surface-mount design, allowing for easy installation in locations where ceiling access may be limited. This model includes a 4-inch speaker and is particularly suited for smaller spaces that require efficient sound distribution without compromising audio quality. It employs advanced technology to minimize distortion and ensure crisp voice transmissions, making it an excellent choice for intercom functionalities.

The V-1063A is a wall-mounted speaker that combines aesthetics with functionality. Featuring a 4-inch speaker, it provides clear audio and is perfect for environments that demand clear announcements. This model is designed for flexibility, making it suitable for both commercial and industrial applications. The V-1063A is also equipped with a built-in transformer, allowing it to operate on various power levels, ensuring adaptability.

The V-1061-W model is noteworthy for its wireless capabilities, facilitating easier installations without the need for extensive wiring. This model retains the same high-quality audio production characteristic of Valcom products, making it ideal for locations where cabling could be an issue. It is particularly useful in areas such as large warehouses or retail spaces where mobility and coverage are paramount.

Finally, the V-1066A takes intercom technology up a notch with its enhanced sound quality and integrated features. This speaker is designed for high-traffic areas and provides robust performance. Its weather-resistant design allows it to be used both indoors and outdoors, making it suitable for factories, outdoor venues, and other challenging environments.

In summary, Valcom's V-1060A series offers a diverse range of intercom solutions that combine innovative technology, quality audio performance, and practical design. Whether you're looking for ceiling-mounted, wall-mounted, or wireless options, these models provide versatile solutions for effective communication across various settings. Each model is designed with user needs in mind, ensuring reliable and clear audio delivery in both everyday and emergency situations.