3.Weight will be shown on the display.
4.Press the "UNIT" button until "PCS" is indicated on the display.
5.Quantity of items placed on the scale will be shown on the display.
Please Note: To determine the quantity of a different item than the item the scale has been calibrated to, repeat the steps in "Calibrate the Scale to an Item" (page 5).
Zero & Tare Functions
To measure items as they are added, use the Zero and Tare Functions. If the weight of the items being measured is below 4% of the scale’s capacity (less than 8 g/0.282192 oz), the Zero function is used. If the weight of the items exceeds 4% of the scale’s capacity, the Tare function is used.
1.Place item(s) on the center of the scale.
2.Weight will be shown on the display.
3.Without removing the item(s), press "Z/T" button to reset display to "0:00".
4.Depending on the weight of the item(s), you will see the Zero indicator "O" or the Tare indicator "TARE" on the display.
5.With the first item(s) still in place, add the next item to the scale. The display will now show the weight of that item.
6.Press "Z/T" button to view the combined weight of the two items.
7.Press "Z/T" button again to reset the display to "0:00".
8.Repeat these steps
Minus Function
If you add multiple items to the scale at one time to get a total weight, you can measure the weight of a single item or ingredient by using the Minus Function:
1.Add item(s) to the scale.
2.Total weight will be shown on the display.
3.Press "Z/T" button to reset the display to "0:00".
4.Remove an item.
5.Value shown on the display with the with the Minus Function indicator
6.Press "Z/T" button to view the total weight of any remaining items on the scale.
7.Repeat these steps
Momentary Backlight
The display's momentary backlight will turn on when the scale is powered on. Backlight turns off after 30 seconds of inactivity. Backlight turns on again while scale is in use.
6