OPERATION
Using the Clock
Set the Alarm Time
Slide Alarm #1 and/or Alarm #2 switch ON (alarm time cannot be adjusted if the alarm is OFF).
Press and release the “
1” or the “ 
2 ” button to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “
” or “
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ 1” or “ 2 “ button to
adjust the next preference. The preference set order is as follows:
ALARM CLOCK HOUR
ALARM CLOCK MINUTE
ALARM EVERY DAY or WEEKDAYS ONLY or WEEKENDS ONLY
You will automatically exit ALARM SET MODE if no buttons are pressed for 5 seconds. Enter ALARM SET MODE at any time by pressing the “ 
1 ” or
“
2“ button.
Backlight
During power adapter use, press the Snooze button for momentary backlight at 100% brightness. During
The backlight MAY turn off at 2:00 AM and 3:00 AM to acquire the atomic clock (RCC) signal.
USB Charging
Charge your mobile device by plugging your device’s USB power cord (not included) into the USB charging port on the back of the clock.
USB charging is only available during power adapter use; USB charging is not active when operating on battery power only.
Note: Follow the manufacturer’s instructions for your mobile device(s) to determine compatibility with the USB charging feature on this product. This product’s USB port has a maximum output of 5V 1A (1000mA). Some devices may not support USB charging or may require a higher power rating than this product provides. Observe the charging status on your device. Ensure your device is working properly before attempting to charge.
8