Sony CSD-TD10, CSD-TD30 manual Presetting Stations, Repeat steps 1, Maintenance

(CSD-TD30 only)

PRESETTING STATIONS

You can preset up to 15 stations in each band.

1 Select a station.

2 Press PROGRAM once so that “M” is displayed to store the station.

A station is assigned a preset number, beginning from 1 in consecutive order for each band.

Preset number

Frequency

3 Repeat steps 1 and 2.

The next station will not be stored if a total of 15 preset stations have already been stored for a band.

To listen to preset stations

Select a band then press e repeatedly.

To clear a preset station

Select the preset number first. Within 5 seconds, hold down PROGRAM until “M” and the preset number disappear in the display.

The higher numbers in the band are decreased by one.

Maintenance

To clean the cabinet

Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner.

To clean the heads

When the tape heads are dirty;

-high frequency sound is not emitted

-the sound is not adequately high

-the sound is off-balance

-the tape cannot be erased

-the tape cannot be recorded on

After every 10 hours of use, clean the tape heads with a head cleaning cassette.

Use separately sold dry-type or wet-type cleaning cassette.

Refer to the instructions of the cleaning cassette for details.

To clean the lens	Lens
Use a cotton swab
slightly moistened with
cleaning fluid. Wipe
gently from the center
to the edge.

ENGLISH 7