EM 3031 and EM | Sennheiser EM 3032-V, EM 3032-U specs

EM 3031/EM 3032

RF Wireless Systems 3000 Series Receivers

1 2 3

1“FREQUENCY MHz” display

2 “CHANNEL” display

3 Alphanumeric main display

4 10-step level display for incoming RF signal, with peak warning

5 10-step level display for incoming AF signal, with peak warning

6 6-step display for transmitter battery status, with “Low Batt” warning

7 Diversity antenna A active

8 Squelch active (MUTE)

9 Diversity antenna B active

10 Frequency groups display

Reading off the LC display

EM 3031 and EM 3032

With the EM 3031 single receiver and EM 3032 twin receiver, Sennheiser offers two 19” high-quality RF receivers which have excellent operational reliability and are extremely user-friendly. Combined with a suitable hand-held or bodypack transmitter, they form a studio-quality radio link. Both receivers use true diversity technology to reduce drop outs to an absolute minimum and ensure interference- free operation.

Due to the wide switching bandwidth of the EM 3031 and EM 3032 receivers (24 MHz for the UHF variant, 7 MHz for VHF) and due to their up to 32 receiving frequencies you can easily switch to unused frequencies in case of interference on a selected channel. The EM 3031 and EM 3032 receivers have been designed for demanding show and broadcasting applications and are ideally suited for large multi-channel systems.

With the GA 3030 AM antenna mount, the antenna sockets can be relocated at the receiver front, for example if the rear of the rack is closed. If you need to choose an antenna position away from the receivers, Sennheiser offers the A 12 AD UHF active directional antenna or the A 1031-U passive omni-directional antenna for the UHF range and the A 2 P passive omni-directional antenna for the VHF range. The EM 3031 and 3032 receivers output the audio signal via an XLR-3 socket at the rear. The level control serves to adjust the AF signal level and adapt it to the sub- sequent mixing console or amplifier.

The receiver display indicates the chosen receiving frequency or, optionally, the channel number which it has been assigned. You can also read off the field strength of the incoming RF signal in µV and the deviation of the audio signal (i.e. the modulation level of the RF signal) in %. Both RF and AF display have a peak warning in case the signal strength becomes excessively high. Short peak periods are not critical. If, however, the audio signal is overmodulated very often and for quite some time, the sensitivity of the transmitter must be reduced. The AF display is additionally provided with a “peak-hold” function, i.e. peak values are displayed for some time so that it becomes easier to detect them.

EM 3031

EM 3032

11/4” headphone output jack socket

2 Volume control for headphone output

3 Multi-function LC display

Operating controls of the EM 3031 and EM 3032 – front panel

4	and buttons for selecting the receiving
	frequency/channel number
5	SET button for menu selection and storage
6	mOn/off.switch
	mOn/off.switch

EM 3032-V, EM 3032-U specifications

The Sennheiser EM 3032-V and EM 3032-U are advanced wireless microphone receivers designed to provide exceptional sound quality and reliability in various applications, including live performances, broadcast, and public speaking. These versatile components are part of Sennheiser's renowned evolution wireless series, known for their user-friendly operation and superior audio characteristics.

One of the standout features of the EM 3032 receivers is their robust frequency management system. The devices operate in the VHF (EM 3032-V) and UHF (EM 3032-U) frequency ranges, ensuring minimal interference from other wireless systems and electromagnetic sources. This adaptability is crucial in crowded RF environments, allowing users to select the optimum frequencies for their specific location and application.

The EM 3032 receivers are equipped with a dual-channel configuration, meaning they can capture two separate audio signals simultaneously. This is particularly beneficial during live events where multiple performers or speakers are present. The dual-channel setup not only simplifies the audio routing but also provides a coherent stereo output, enhancing the overall listening experience.

Another significant aspect of the EM 3032 series is their exceptional audio fidelity. With a wide frequency response and low distortion levels, the receivers are capable of delivering clear and natural sound reproduction. This clarity is especially important for applications requiring precision audio, such as professional theater productions and corporate presentations.

User-friendly control options are also a hallmark of the EM 3032-V and EM 3032-U. The backlit LCD display provides real-time status information, including battery life, signal strength, and audio levels, facilitating easy monitoring during operation. The front-panel controls allow for quick adjustments to gain settings and audio configurations, ensuring smooth transitions and minimal disruptions.

Moreover, the EM 3032 receivers are built with durability in mind. Their rugged construction can withstand the rigors of transport and on-stage use, making them ideal for touring professionals. Additionally, the devices can be mounted in standard 19-inch racks, offering flexibility in setup and integration into existing sound systems.

In summary, the Sennheiser EM 3032-V and EM 3032-U wireless microphone receivers are highly dependable solutions that combine advanced technology, outstanding audio performance, and user-friendly features. Whether for live music events, corporate functions, or broadcast applications, these receivers deliver the reliability and sound quality that professionals expect.