A T U R E S | Snell Acoustics ICS Sub 24 manual

F E A T U R E S

Crossover Low-Pass Filter Control

This control sets the frequency of the low-pass filter, and is fully adjustable from 50 to 150Hz. Bass sound below the selected setting are directed to the ICS Sub 24 amplifier and speaker.

Low Level Inputs

Use this input when your system has preamp outs and amplifier inputs.

Low Level High Pass Outputs

When the low level inputs are used, these outputs provide the signal that goes to the power amplifier in the system. The signal from these outputs is high pass filtered to remove bass sound below 80 Hz.

THX Input

This input is for use with receivers or surround sound controllers that have built-in THX control systems. This input bypasses the low pass filter and ALL the crossover controls of the ICS Sub 24.

Speaker Level Inputs

The ICS Sub 24 also has high-level inputs that can be used when preamp outputs/power amp inputs are not available. The 5-way gold-plated terminals accept spade lugs to 5/16 inch, pins, banana plugs, and up to 12- gauge bare wire. When main speakers are connected to the speaker level

Speaker Level Outputs

These outputs provide signals for the main speakers when the speaker level inputs are used. The signal from this output is high pass filtered to remove bass informa- tion below 80 Hz.

Bass Level Control

The Bass Level control adjusts the sound level output of the ICS Sub 24. It is located on the front of the cabinet, behind the grille.

To access the control grasp the top and bottom edges of the grill and pull it straight off the front of the cabinet. A typical setting for the control is around the 12 o’clock position.

Bass Drivers

The ICS Sub 24 uses two 12-inch (305 mm) custom-built bass unit with dual spiders, a coated paper cone with butyl surround, and a die-cast aluminum chassis. The driver has a front-mounted heat sink that draws heat away from the voice coil, increasing power capacity.

Phase Switch

Determines whether the subwoofer adds or cancels in the crossover region. The proper setting changes based upon the current location of the speaker.

Turn On Mode

This switch controls the automatic power up function. When the switch is set to Auto On, the amplifier will power up when it senses an input signal. If no input signal is present, the amplifier switches to low power standby mode after 8-10 minutes. The LED next to the Power switch lights green when the amplifier is on, and yellow when it is in standby mode. Put the switch in the Always On position to defeat the automatic power down feature.

Power Switch

The main power switch is located next to the power cord socket. Push in the top side of the switch to turn on the main power to the system. Push in the bottom side to turn off the main power. Usually the only time the main power switch should be turned off is when the sub- woofer will not be used for an extended period of time, such as when you are away on a vacation.

Handmade Cabinets

Our cabinet department hand assembles each unit, and then hand sands each several times. The result is a cabinet of exceptional workmanship, with sharp corners and smooth sides.

Veneers

We use premium, book-matched veneers, chosen for grain consistency and aesthetics. Our cabinet shop sequences the veneer, maintaining a match from the left side, across the top, to the right side of the speaker. We even veneer the inside of the cabinet so it won’t warp or separate at the edges as the humidity changes .

ICS Sub 24 specifications

The Snell Acoustics ICS Sub 24 is a powerful subwoofer designed for audiophiles and home theater enthusiasts who seek premium sound quality and deep, impactful bass performance. This subwoofer stands out due to its innovative design and advanced technology, making it an excellent choice for enhancing both music and movie experiences.

One of the key features of the ICS Sub 24 is its impressive 12-inch woofer, which is engineered to deliver precise low-frequency reproduction. The woofer is crafted from high-quality materials that minimize distortion while maximizing excursion. This design ensures that the subwoofer can produce deep bass that’s not only powerful but also articulate, allowing users to hear and feel the full spectrum of sound.

The ICS Sub 24 incorporates advanced DSP (Digital Signal Processing) technology that allows for customizable sound settings. This capability enables users to tailor the bass output to suit their specific listening environment. Whether it’s adjusting the crossover frequency or fine-tuning the phase, the DSP settings provide versatility for achieving the desired acoustic performance.

Another notable characteristic of the ICS Sub 24 is its robust cabinet construction. The enclosure is designed to minimize resonance and standing waves, which can color the sound. This ensures that the bass notes are clear and consistent, whether in music playback or high-impact movie sequences. The subwoofer's design also allows for efficient airflow, reducing port noise and enhancing overall performance.

Connectivity options are abundant with the ICS Sub 24, featuring both traditional RCA inputs and more modern options like LFE inputs. This versatility makes it easy to integrate the subwoofer into various audio setups, whether it’s a stereo system or a full-fledged home theater.

With a sleek and modern aesthetic, the Snell Acoustics ICS Sub 24 is not only a performance powerhouse but also a visually appealing addition to any space. Its compact size allows for flexible placement, ensuring users can find the perfect spot that complements their existing speaker setup.

In summary, the Snell Acoustics ICS Sub 24 combines cutting-edge technology with high-quality components to deliver an unparalleled bass experience. With its powerful 12-inch woofer, customizable DSP options, robust cabinet design, and versatile connectivity, this subwoofer is an exceptional choice for those who demand the best in audio performance. Whether for music listening or cinematic adventures, the ICS Sub 24 is designed to impress and to immerse listeners in their favorite sounds.