SV Sound SBS-01, MTS-01, SCS-01 specifications SV Sound

Page 20

Chapter 11-3 Channel level calibration

SV Sound

 

 

∙But what’s “too high” for your subwoofer?? Tastes vary, and so do movie soundtracks, but if you purchased an SVS subwoofer, it’s capable of tremendous levels of low distortion, low frequency bass — often much more than most subwoofers. Take advantage of this, especially if you like action movies with lots of bass action. You can do so by allowing your subwoofer levels to rise a couple dB’s louder than your other speakers during your level calibration. Since most audio enthusiasts don’t watch movies at full theater playback levels, this often yields a more satisfying movie and music experience.

∙What subwoofer levels do we recommend? If you pur- chased an SVS subwoofer, and watch movies at relatively moderate sound levels, audition a range of +1dB to +3dB above your other channels (as measured with your SPL me- ter). This means the test tone will waiver about 78dB for the subwoofer portion of the calibration run (88dB with Avia). (Note: You may want to rotate the sound meter SPL meter dial to 80dB to get a good reading with these higher levels.)

∙The above is a guide… experiment! The louder your master volume though, the more you should back off the subwoofer’s level to compensate. Audible distress is a sign to lower things a bit. Avoid your driver bottoming, resulting in a loud ―clack‖!

∙Location and measurement. You should take the above measurements from your typical preferred seat for watching movies. Be advised, strong bass levels can vary tremendously simply by moving your seat, or your subwoofer, only a few feet. Such is the nature of long wave-length, low bass sound. Do not hesitate to try different locations and different playback levels for your subwoofer.

∙Setting levels for the subwoofer which are too high (and often, too low) is the most common audio system setup error. If you make any changes to your system configuration, or move your speaker or subs, you should always run your AVR test tones to validate channel levels a final time. If you ever hear a hard ―clack‖ from your subwoofer during movie or music playback, you should immediately turn down your sub- woofer level control at the AVR, or the subwoofer’s own gain control, or both.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Contents I D ESVSound Safety SVSound SVSoundubwoofers About your SVS speakersLocation, location, location Properly set up in a typical SV SoundSetup and room integration Placing your SVS speakers within your roomSpeaker placement 5.1 versus 7.1 channel Speaker placement 5.1 Channel Surround Sound System Speaker placement 7.1 Channel Surround Sound System WiringSV Sound Connections, phase, wire and more Speakers with mirrored tweeter MTS-01 and SCS-01 Tweeter attenuation MTS-01 Only MTS-01 Speaker family port tuning Audio/Video System Configuration SVSound Channel level calibration SV Sound SV Sound Specifications Mounting OptionsModel Name MCS-01 Configuration Model Name MTS-01 Configuration Terms and Conditions

SBS-01, SCS-01, MTS-01 specifications

SV Sound, renowned for its high-performance audio equipment, has made significant strides in the home theater market with its lineup of speakers, particularly the MTS-01, SCS-01, and SBS-01 models. Each of these speakers embodies the brand's commitment to superior sound quality, innovative technologies, and thoughtful design, making them ideal choices for audiophiles and casual listeners alike.

The MTS-01 is a tower speaker that stands out with its sleek design and robust construction. This model features a three-way configuration, which includes dual 5.25-inch bass drivers that deliver deep, impactful low frequencies. The MTS-01 is equipped with a 5.25-inch midrange driver that offers clear and detailed vocal reproduction, alongside a 1-inch silk dome tweeter that provides smooth high frequencies. This combination results in an expansive soundstage and exceptional clarity across all frequencies, making it perfect for both music and movies. The MTS-01 also integrates advanced crossover technology, ensuring that each driver operates within its optimal range, leading to a balanced and cohesive audio experience.

The SCS-01, on the other hand, is designed specifically as a center channel speaker, making it an essential component for any home theater setup. This model features dual 5.25-inch woofers and a 1-inch tweeter, ensuring that dialogue remains crisp and clear, even at low volumes. The SCS-01 is engineered to match the tonal characteristics of the MTS-01, providing a seamless audio experience when paired together. Its compact design allows for flexible placement options, whether mounted on a shelf or integrated into a custom entertainment unit.

Lastly, the SBS-01 serves as a versatile surround speaker option for an immersive audio experience. This model features a satellite design and is equipped with a 4-inch woofer and a 0.75-inch tweeter, making it perfect for filling larger spaces with enveloping sound. The SBS-01 can be used in various configurations, including bipole or dipole modes, allowing users to customize their surround sound experience based on their room's acoustics.

Together, the MTS-01, SCS-01, and SBS-01 offer a complete audio solution that caters to any home theater setup. Built with high-quality materials and advanced audio technology, these models ensure that users can enjoy their favorite content with exceptional clarity and depth. Whether you’re watching a blockbuster film or listening to your favorite album, SV Sound’s speakers promise to deliver an unparalleled auditory experience that truly captivates.
Top Page Image Contents