Checking
Troubleshooting
Check
Unit does not operate
Does the display light up?
Is Energy Saver key flashing?
Does the Add Paper Indicator appear on display? (J)
Does the Paper Misfeed Indicator appear on display? (I)
Does “CLOSE RIGHT COVER” appear on message display?
Does U19 appear on message display?
Does “CLOSE ADF” appear on message display?
Does U40 appear on message display?
Does any of the
Does “INFO. CODE=###” message appear on display?
Does
Copies are marked
Is the copier platen glass or platen cover dirty?
Is the corona dirty?
Is the back side of copies dirty?
Action
Check if the Power Switch is turned on and if the power plug is inserted into the outlet.
Press Energy Saver key on control panel.
Add paper. (See page 23) or check if the paper tray is closed completely.
When the 2nd paper feed module is not installed, the paper size should be selected “0: Not installed”. (See page 24)
Remove misfed paper. (See page
Right cover is open. Please close it.
Check if toner cartridge is installed completely. (See page 25)
Close ADF (Automatic Document Feeder)
Add paper to the sheet bypass and press Start.
Turn copier power switch off, then back on. If error code comes back again, call your Panasonic authorized dealer.
Refer to the Information Codes of the Operating Instructions (For Facsimile) on page 89.
Replace the Litium Battery,
refer to operating instructions (For Facsimile).
Clean the glass or platen cover. (See page 33)
Need to clean corona. (See page 34)
Clean the roller. refer to operating instructions (For Facsimile).
32