SV Sound PB12-NSD/2 warranty Setup, calibrating and integration

Page 4

Page 4

SV Sound

 

 

Setup, calibrating and integration

What’s to know? Well, first of all, setting up an SVS Subwoofer is pretty darn easy. There are a few key things to get right if you want to get the most out of your new equipment however!

Unpacking. You’re probably eager to fire up your sub (we’re the same way), but take time to carefully unpack your sub. Set the box and other protective shipping materials aside; saving them in case you ever need to return the subwoofer for any reason. Fold your box flat for storage even.

Location. They say it’s “all about location”, right? It’s the same with setting up your subwoofer. So, where to put it? Go for a corner if you can, and avoid putting your sub where it might adjoin large open areas. Studies have shown the deepest and flattest bass response is typically attained when a subwoofer is placed within a few feet of one of your room’s corners. Whether you put the sub in front or to the rear of your seating area usually makes surprisingly little audible difference. Deep movie and music bass, like that from Dolby Digital (DD) “5.1 channel” DVDs and digital audio is largely non-directional. You can’t tell where it is coming from, even though you can hear, and feel it.

Hook-up(see fig. 1). There are a variety of ways to configure your new sub. Usually, a simple mono, shielded 75 Ohm A/V RCA type cable (a.) is used to take the subwoofer output of your DD/DTS surround sound receiver (b.) and feed the low-level input of the SVS’s amp. There is no need to “split” the signal going to the sub (c.). You can feed either one of the two amp inputs, it doesn’t matter, right or left.

(a.)

(c.)

Fig. 1

NOTE: Stop now if you aren’t TOTALLY familiar with your re- ceiver’s manual. Ensure all power to your equipment is off when

making these connections. Also, be cer- tain your power outlet can handle a minimum of 700 watts. (Use of “convenience outlets” on receivers are not recommended for your SVS).

(b.

DD/DTS Processor/Receiver

 

 

(Subwoofer “Out”)

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents N E R S ’ G U I D E Welcome About your SVS Subwoofer Setup, calibrating and integration More Setup, calibrating and integration Some things to check as you get ready to calibrateSV Sound SV Sound SV Sound Subsonic Filter and Port Tuning SVS PB12-NSD/2 tuning chart Bassy demo scenes to die for More Bassy demo scenes Glossary of Home Theater Terms SV Sound SV Sound Warranty

PB12-NSD/2 specifications

The SV Sound PB12-NSD/2 is a powerful subwoofer designed to deliver an exceptional audio experience for both music enthusiasts and home theater enthusiasts. It embodies a perfect combination of strength, innovation, and quality, making it a standout choice in the competitive subwoofer market.

One of the standout features of the PB12-NSD/2 is its robust design. It is equipped with a high-performance 12-inch driver that utilizes a specially engineered oversized voice coil, allowing for greater power handling and improved thermal stability. This design enables the subwoofer to produce deep, resonant bass that can fill large areas without distortion, enhancing the overall audio experience.

The PB12-NSD/2 incorporates advanced technologies to ensure optimal performance. It features a well-tuned ported enclosure, which helps to minimize turbulence and ensures that the airflow is smooth. This design allows for more effortless bass response and provides richer low-frequency performance. The integrated amplifier delivers impressive power, providing an output that can reach deep into the lower registers, making it ideal for movie soundtracks and musical genres that rely on strong bass lines.

Another notable characteristic of the PB12-NSD/2 is its adjustable phase control and frequency response settings. This flexibility allows users to fine-tune the subwoofer's integration with existing speakers in their audio setup. Coupled with a robust crossover network, the PB12-NSD/2 can seamlessly blend with speakers of varying sizes and capabilities, ensuring that users experience a coherent and immersive audio landscape.

The subwoofer is designed with convenience in mind, offering both line-level and speaker-level inputs for easy connectivity. This versatility ensures compatibility with a wide range of audio systems, making it easy for users to enhance their current setups. Additionally, the unit's build quality is commendable, featuring a durable cabinet that minimizes vibration, ensuring that the audio quality remains uncompromised.

In summary, the SV Sound PB12-NSD/2 is a powerhouse subwoofer that enriches the listening experience through its deep bass response, advanced design features, and unparalleled flexibility. It is an excellent choice for anyone seeking to elevate their audio experience, whether for music or home theater applications.
Top Page Image Contents