SV Sound 20-39PCi, 25-31PCi, 16-46PCi warranty More Setup, calibrating and integration

Page 5

SV Subwoofers

Page 5

More Setup, calibrating and integration

If you are running a pair of SV Subwoofers (fig. 2), you will need to use a standard “Y” cable adapter (c.) The best adaptor to use for this task has one male RCA connection and two female RCA outputs.

(Radio Shack ® stocks them.) From the “Y” cable you can run a stan- dard 75 Ohm signal cable (d.) to each sub thus “splitting” the Low Fre- quency Effects (LFE) and other bass signals from your receiver, thus feeding both subwoofers.

!ampNOTE: Now is a good time to select if you want “ON” (always on) or “AUTO ON” which turns your sub on only when a bass signal is present.

(d.)

(c.)

Fig. 2

“Y” cable/splitter from re- ceiver

DD/DTS Processor/

Receiver

Calibration” isn’t only for tech minded folks, it’s critical to a proper configuration of your home theater sound system. Fortunately, adjusting channel balance (or calibration) is as easy to do as it is important. The first order of business is making sure your DD/DTS surround sound sys- tem is set up properly. We recommend you consult your audio/video receiver (or processor) manual to refresh on the procedures to do this. Generally, this requires ensuring the receiver’s test tones, or a special test disk (like Video Essentials or Avia) plays back at the same volume from each of your system’s full range speakers. That’s left, center, right, left surround and right surround speakers, plus the subwoofer . (More on sub level in a second). Skip now to page 7 (“Powered Cylin- der Amp”) if you aren’t familiar with your sub’s amp, and come back to calibration.

Some things to check as you get ready to calibrate your system:

Are your speakers set correct to the correct “size”? Your receiver/ processor might allow you to indicate if your speakers are “Small” or

Image 5
Contents OWNERS’ Guide Welcome About your SV Subwoofer Setup, calibrating and integration More Setup, calibrating and integration SV Subwoofers SV Subwoofers SV Subwoofers Bassy demo scenes to die for More Bassy demo scenes Glossary of Home Theater Terms Warranty

20-39PCi, 16-46PCi, 25-31PCi specifications

SV Sound (SVS) has established itself as a sterling name in the realm of high-performance audio equipment, and the trio of subwoofers – 16-46PCi, 20-39PCi, and 25-31PCi – showcases its dedication to exceptional audio quality, innovation, and craftsmanship. Each model is designed to deliver powerful, deep bass reproduction, allowing audiophiles and home theater enthusiasts to enjoy a rich, immersive sound experience.

The 16-46PCi stands out with its dynamic 16-inch driver and a tuned port design, optimizing performance at both low and high volumes. With a frequency response that extends down to 16 Hz, it is capable of producing sub-bass frequencies with unparalleled accuracy. This model features a powerful amplifier, offering 500 watts RMS and peaking at 1,200 watts, ensuring robust power and minimal distortion even during the most intense movie scenes or musical performances. The 16-46PCi's cabinet construction incorporates high-quality MDF, which aids in reducing resonance and enhancing clarity.

Next in line is the 20-39PCi, featuring a larger 20-inch driver designed for deeper bass extension and pressure. Ideal for larger rooms, this subwoofer also offers a frequency response down to 20 Hz. The 20-39PCi employs a similar high-powered amplifier configuration with remarkable 500 watts RMS, peaking at 1,000 watts. Its rear-firing port design permits airflow that enhances both efficiency and sonic impact. This model excels in seamlessly blending with other speakers, providing a balanced sound that can fill large spaces without overwhelming the listener.

Finally, the 25-31PCi subwoofer targets those seeking an optimal mix of size and performance. With a 25-inch driver, it delivers impressive power and depth, producing frequencies as low as 25 Hz. The 25-31PCi is designed for ultimate flexibility, sporting a dual port configuration that allows users to adjust tuning based on room acoustics. Boasting similar power specifications as its siblings, it ensures that dynamic content is reproduced with tight control and precision.

All three models incorporate SVS’s proprietary technologies, such as adjustable phase control, low-pass filter, and variable gain settings, ensuring seamless integration with existing audio systems. Their stylish aesthetics, combined with exceptional build quality, make these subwoofers not only functional but also visually appealing additions to any listening space.

In summary, the SV Sound 16-46PCi, 20-39PCi, and 25-31PCi subwoofers cater to diverse audio needs, offering high-quality engineering that brings cinematic and musical experiences to life.