Panasonic DIN Connectors manual Ordering Information, Specifications, Characteristics

DIN CONNECTORS (AXD)

ORDERING INFORMATION

AXD

DIN connectors 1: Socket

2: Header

<No. of contacts (2 digits)>
20: 20 contacts	32: 32 contacts		44: 44 contacts
50: 50 contacts	64:	64 contacts	90: 90 contacts
96: 96 contacts	00:	100 contacts

<Type and contacts layout>

2:B type (2 rows terminal pitch: 2.54 mm)

3:C type (The middle row is removed terminal pitch: 5.08 mm)

4:C type (3 rows terminal pitch: 2.54 mm)

6:R type (The middle row is removed terminal pitch: 5.08 mm)

7:R type (3 rows terminal pitch: 2.54 mm)

8:Q type (2 rows terminal pitch: 2.54 mm)

<Terminal shape and product types>

No.	PC board	Self-clinching	Flux	Terminal
	mountig form	bracket	resistant	shape
0		Not available	Not available
2	PC board top		Available
5	mounting type	Available	Not available	DIP terminal
7			Available
1	PC board edge	Not available	Not available
	mounting type
<Surface treatment (Contact portion/Terminal portion>
1: Au plating/Sn plating

1

SPECIFICATIONS

1. Characteristics

	Item	Specifications	Conditions
	Rated current	2A
	Rated voltage	300V AC
Electrical	Breakdown voltage	1,000 V AC for 1 min.	Detection current: 1mA
characteristics	Insulation resistance	Min. 1,000MΩ	at 500V DC megger
	Contact resistance	Max. 20mΩ	Measured based on the HP4338B measurement method of
			JIS C 5402.
	Composite insetion force	Max. 0.843N {86gf} ⋅ no. of contact
Mechanical	Unit removal force	Min. 0.15N {15.3gf}	Measured by steel gauge with 0.56(t)⋅0.8(W)mm and
characteristics			smoothness 0.1s.
	Post holding force	Min. 19.6N {2kgf} (header side)
Lifetime	Insertion and removal life	1,000 times
characteristics
	Ambient temperature	–55°C to +125°C	At less than 85% R.H. (No freezing at low temperature)
Environmental	Soldering temperature	260°C: within 10 sec.
characteristics		300°C: within 5 sec.
	resistance
		350°C: within 3 sec.

2. Material and surface treatment

Part name	Material	Surface
Molded portion	Glass reinforced PBT	—
	(UL94V-0)
Socket contact	Copper alloy	Contact portion: Ni plating on base, Au plating on surface
		Terminal portion: Ni plating on base, Sn plating on surface
Header post	Brass	Contact portion: Ni plating on base, Au plating on surface
		Terminal portion: Ni plating on base, Sn plating on surface

Note) Please consult us for different plating requirements.

3. Applicable PC board

	B, C type socket	1.6 to 2.4mm
PC board	Q, R type header
thickness	B, C type header	1.6mm
	Q, R type socket

panasonic-electric-works.net/ac