Panasonic WJ-NT304 Specifications, Standard Accessories, Network Interface Unit, AC Adapter

Page 19

Specifications

Network Interface Unit

Power source:

12 V DC, 1.0 A (using the supplied AC adapter)

Power consumption:

Approx. 12 W

Ambient temperature:

–10 °C to +50 °C {14 °F to 122 °F}*1

Ambient humidity:

Less than 90 %

Video input connectors:

NTSC model: 1 V [P-P]/75 (BNC x 4), NTSC composite video signal

 

PAL model: 1 V [P-P]/75 (BNC x 4), PAL composite video signal

Video output connectors:

NTSC model: 1 V [P-P]/75 (BNC x 4), active loop-thru output NTSC composite video signal

 

PAL model: 1 V [P-P]/75 (BNC x 4), active loop-thru output PAL composite video signal

Audio input connector:

–10 dBV, 10 k, unbalanced x 1 (RCA pin jack)

Audio output connector:

–10 dBV, 600 k, unbalanced x 1 (RCA pin jack)

Serial port:

9-pin D-sub connector x 1 (For remote setup)

 

RS-485, x1 (RJ-11) (For external device control)

Parallel port:

Input x 4*2, output x 4*3, AUX output x 1*3, Time adjust input x 1*2

Resolution:

640 (H) x 480 (V) / 320 (H) x 240 (V) selectable

Image compression method:

JPEG/MPEG-4

Audio compression method:

G.726

Protocol:

HTTP1.1, RTP, TCP/IP, UDP/IP, FTP (server and client), SMTP, DHCP, DNS, DDNS, NTP, SNMP

Camera control:

Pan and tilt/zoom and focus/preset positions/auto focus

 

(When using Panasonic combination dome cameras)

Network:

10BASE-T/100BASE-TX, RJ-45 connector

Security:

Password

OS:

Microsoft® Windows® 2000 Professional SP4, Windows® XP Home Edition SP2, Windows® XP

 

Professional SP2

Browser:

Microsoft® Internet Explorer® 6.0 SP2

 

Microsoft® Internet Explorer® 6.0 SP1 only when using Windows® 2000 Professional SP4

 

Compatible SD memory card is as follows. (Optional)

 

Manufactured by Panasonic (Performance with this unit has been checked.)

 

Capacity:64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (SDHC memory card is not supported.)

Dimensions:

210 (W) x 44 (H) x 307 (D) mm {8.27" (W) x 1.73” (H) x 12.09” (D)}

 

(excluding rubber feet and projections)

Weight:

Approx. 2.0 kg {4.4 lbs.}

AC Adapter

Power Source:

100 V AC to 240 V AC, 50 Hz/60 Hz

Output voltage:

12 V DC

Output current capacity:

4.58 A

Dimensions:

120 mm (W) x 60 mm (H) x 35 mm (D) {4.72" (W) x 2.36" (H) x 1.38" (D)} (excluding the DC cable)

Weight:

0.35 kg {0.77 lbs.}

*1

When using this product without turning the power off

*2

Non-voltage make contact input, 50 k+5 V DC pull-up

*3

Open Collector output, +24 V, 100 mA maximum

Standard Accessories

CD-ROM*

1 pc.

Operating Instructions (this book)

1 pc.

Warranty card (NTSC model only)

1 pc.

*The CD-ROM contains the operating instructions (PDFs and the software).

The following are for installation.

 

AC adapter*

1 pc.

Code label

1 pc.

Power cord*

 

NTSC model

1 pc.

PAL model

2 pcs.

* Use the power cord that is suited to your locality.

 

19

Image 19
Contents Operating Instructions For Your Safety Please Read the Following Text CARE- Fully For Canada Important Safety Instructions Limitation of Liability Disclaimer of WarrantyPreface FeaturesSystem Requirements for a PC About These Operating InstructionsTrademarks and Registered Trademarks Network Security Contents Precautions Code label Location to install this unitAvoid installing in the following locations Rack mountingFront view Major Operating Controls and Their FunctionsRear view Rack Mounting When connecting with a PC directly When connecting to a network using a PoE device hubConnection Example How to remove the SD memory card How to insert an SD memory cardInsert/Remove an SD Memory Card Install the software Configure the Network SettingsUninstall the software Cause/solution TroubleshootingAC Adapter SpecificationsStandard Accessories Network Interface UnitUnit Company of Panasonic Corporation of North America For business users in the European Union
Related manuals
Manual 20 pages 5.6 Kb