Panasonic WMP54G manual Instant Wireless Series

Instant Wireless® Series

2.The screen that appears will show any available wireless network. Select the network you want.

If you have already enabled WEP encryption on your network, skip ahead to step 3.

If you have NOT enabled WEP encryp- tion on your network, the screen in Figure 4-4 will appear. Check the box next to Allow me to connect to the selected wireless network, even though it is not secure. Then click the Connect button and continue to step 4.

Figure 4-4

Note: Steps 2 and 3 are the instructions and screenshots for Windows XP with Service Pack 1 installed. If you have not installed Service Pack 1, select the network you want, and click the Connect button. If the network has WEP encryption enabled, enter the WEP key in the Network key field, and then click the Connect button.

3.The screen in Figure 4-5 will appear. Enter the WEP key of your wireless network in the Network key field, and re-enter it in the Confirm network key field. Then, click the Connect button.

Note: Wireless Zero Configuration does not support the use of a passphrase. Enter the exact WEP key used by your access point.

Wireless-G PCI Adapter

Figure 4-5

4.The screen in Figure 4-6 will appear if your connection is active.

Figure 4-6

For more information about WEP, refer to your access point’s documentation, or visit www.linksys.com.

For more information about wireless networking on a Windows XP computer, enter the keyword wireless in the Windows XP search engine.

Congratulations!

Your PC is now connected to your wireless network.

8 9