Panasonic DP-C323, DP-C354, C263, C213 Overlay Copying with Registered Image, Select Form Overlay

Page 81

Overlay Copying with Registered Image

Overlay an image stored in memory onto the copy.

Form

The scanned

 

original

Chapter 2

￿Available size is 8.5" x 11".

￿“Auto” cannot be selected in color mode.

￿If the orientation of the original is different from the form, the original is copied by automatically rotating when overlaid.

￿If enlargement or reduction is selected using “Zoom” or the paper size setting, the size of the original is enlarged or reduced according to the setting. However, the size of the form is not enlarged or reduced.

￿When “Edge” or “Book” is selected, the edge erasing function and the center erasing function are not executed for the overlay original.

￿When “Margin” is selected, a binding margin is also effective for the overlay original.

￿If “Blank” is selected for “Cover” or “Page Insertion” setting, overlay will not be executed. The image overlay is executed for “Copy” pages in stead.

￿Note that if the power is turned OFF when Hard Disk Drive is not installed, the overlay image is erased.

(Hard Disk Drive is standard equipment for DP-C354/C264. It is optional equipment for DP-C323/C263/C213.)

1 Place original(s).

4 Select “Insertion / Overlay”, and then

￿Refer to Placing Originals (Copy) in the

select “Form Overlay”.

Operating Instructions (For Basic

 

Operations) of provided booklet.

 

2Press the Copy key if the machine is

set to other function mode.

3Select “More Menus”.

Continue on the next page...

More Menus Features

81

Page 80 Page 82
Image 81
Page 80 Page 82
Contents Operating Instructions Operating Instructions For Basic Operations Operating InstructionsIcons ConventionsNotation Following icons are used in this manualTable of Contents Zoom Zoom / EffectsAuto Zoom EdgeBasic Operation Procedure Basic Menu FeaturesPlace originals Select the required settings if Necessary Set to other function modePress the Start key Enter the desired number of copies. Up toPlace originals Select the desired Color Mode, Selecting the Color ModeThen select OK Select Quality AdjBlack Mode Full Color ModeSelect Full Color, and then select OK Select Black, and then select OKColor Mode When selecting a color from the custom colorsSelect Change Color Select OK Basic Menu Features Basic Menu Features When the registered color is changed Check the adjusted color, and then select OKNew Color Registration Select any button without a registeredConfirm the registered color, and then select OK Adjust the copy density according to your requirements Selecting Original Type and Adjusting the DensityPlace originals Select the Original Type Select the original type corresponding to your documentsEnter the desired number of copies ChapterRegistering Quality Preset Place originals Select the desired quality settingsSelect Save Enter any Quality Preset name, and then select OK Select a Quality Preset button, and then select OKWhen registering a new Quality Preset When updating a registered Quality PresetPlace originals Select a Quality Preset button, Using Quality PresetMemo Select More Settings Quality AdjustingPlace originals Select an image quality type, and then CoolerBasic Menu Features Adjust the level of Background Select Custom SettingBackground Removal Removal with and +, and thenSelect BleedThrough Prevention BleedThrough PreventionTo display this screen, refer to of Background Removal see TintContrast Original can be copied with adjusted contrastSharpness Saturation Original can be copied with adjusted saturationColor Balance Adjust its Color Balance as shownSelect Color Balance Select remaining colors, and thenMemo Place originals Press the Start key Proof CopyingIf the copy quality is satisfactory Select YesSelect Confirm Settings Confirming/Editing the Selected Copy FeaturesCheck the settings, and then select When optional finisher is installedStoring a Job in Memory Select Preset JobsPlace originals Select Save, and then select a job Button that does not have a jobPlace originals To confirm the job settings, select Recalling a Preset Job Stored in MemoryConfirm Settings, and then select Press the Start key Select a stored jobChecking the Waiting to Copy Job Select Output QueueSelect Close Select Copy in the Output Queue Select Yes Screen Deleting Copy JobsSelect a job, and then select Delete Jobs in Ready status can be deletedPlace originals Select a designated computer, Completion NoticeSelect Completion Notice Select an index tab or Favorites toMemo Sided Copy Mode More Menus FeaturesBasic Operation for the 2-Sided Copy Mode Place originals Select the desired 2-Sided modeCopying 2-Sided originals onto two separate sheets Select 2-Sided /Original-Copy, and then select 2Select the bind position, and then select OK Select 2-Sided / Original-Copy Copying Facing Page Original to Two Separate SheetsThen select 2 Select a page order of originalMore Menus FeaturesThen select Booklet Select a bind positionSelect OK to exit the cover settings Copying Mixed Size Originals from the ADF Select an orientation, and then selectThen select Multi-Size Feed More When copying the same paper sizeTouch Basic Menu, and then select a Desired copy size with copy sizeCopying Special Originals Thin Paper, etc. from the ADF No in the confirmation screenThen select Job Build Job Build Memo Sort Mode Sort modePlace originals Select Sort / Finish, and then select Select the stapling position When the optional 1-Bin Saddle Stitch Finisher is installedZoom Mode Variable RatiosPlace originals More Menus Features Auto Zoom Select the desired zoom/type ratio, and then select OK Unnecessary edge can be erased by setting a blank edge Setting a Blank EdgeEffect Modes Place originals Select Zoom / Effects, and thenSelect to set the same erasing width Place originals Input the erasing width with Eliminate Dark Inner Binding ShadowsOr the keypad, and then select Select BookSelect Margin Shift Image to Right, Left, Up or DownBinding margin Select the desired positionInput Width of the binding margin With and , or the keypad,Place originals on the ADF Select Zoom / Effects, and then Copying with StampingSelect Stamping Numbers, Date, etc. can be stamped on each sheetSelect Page Number Chapter More Menus FeaturesStarting page number can be set from1 to Select Issue Number Select the stamping position of issueNumber More Menus Features To change the date, follow the steps below Select Date Select the stamping position Date stampSelect OK Select Text Stamp Select the stamping position of the text Select ChangeOriginal can be copied with printed text Input text, and then select OK Select Centering CenteringImage Repeat Select Zoom / Effects, and then select Image RepeatCreate multiple images on the sheet from single original Insertion Modes Add a Cover Page to CopiesSelect Cover Select Cover until the paper tray to be used is displayed Determine whether to copy the Front/ Back coverInserts Blank/Copied Pages Between Copies To erase an entered number, press the Clear key Place originals on the ADF Inserts Blank Pages Between Transparency FilmMemo Overlaying an Image onto the Copies Overlay ModesPlace originals Select Insertion / Overlay, and then Select OverlayPress Select the overlay position, and then select OKStart key Enter Desired number of copiesMore Menus Features Overlay Copying with Registered Image Select Form OverlayOverlay an image stored in memory onto the copy Select the registered form, and then select OK Select File Edit File EditSelect Save, and then select OK Menus FeaturesSelect the specified colors of the form From basic/custom, and then selectInput the file name, and then select OK Select the file name to be deleted Select Erase, and then OKSelect the file name to be edited Memo Skyshot Mode Other FeaturesSkyshot Mode can be selected in the standard settings Making Copies with the ADF OpenedCopying with pre-registered scan size into memory Manual Skyshot ModeSelect Reserve a Job Place the next original while copying current jobPress the Start key to resume the previous copying operation Interrupt the Current Copy Jobs to Make an Urgent CopyCombined Copy Functions AppendixSort function Symbols IndexNumerics 72, 74, 76, 78, 81 18, 22, 25 Memo USA Only For Service, Call
Related manuals
Manual 62 pages 63.27 Kb

C264, C213, C263, DP-C354, DP-C323 specifications

Panasonic has been a prominent player in the imaging and printing industry, and its range of multifunction printers, including the C263, DP-C354, DP-C323, C213, and C264, exemplifies the company's commitment to quality, efficiency, and innovation.

The Panasonic C263 is known for its versatility as a compact and multifunction color printer designed for small to medium-sized offices. It combines the functionality of printing, scanning, copying, and faxing in one device, which helps save space and reduces operational costs. One of its main features is its high-speed printing capability, reaching up to 26 pages per minute. The C263 also employs a user-friendly touchscreen interface that facilitates easy operation and navigation through various functions. Additionally, its eco-friendly design ensures lower energy consumption without compromising performance.

Moving on to the DP-C354, this model is tailored for high-demand environments where productivity is critical. With a robust print speed of up to 35 pages per minute, the DP-C354 is ideal for busy office settings. Its advanced color interpolation technology ensures vibrant and sharp image quality, making it suitable for high-quality document presentation. This model also supports a variety of media formats, allowing users to print on diverse paper sizes and types. The security features, including user authentication and secure printing, add an extra layer of protection for sensitive documents.

The DP-C323 is another multifunction offering that enhances productivity with its 32 pages per minute printing speed. This model emphasizes ease of use, boasting a large, intuitive touchscreen interface. It can handle various tasks like scanning to email or network folders, which streamlines workflow. The energy-efficient design and low noise operation make it a great fit for office environments focused on sustainability.

The C213 is a compact model aimed at businesses that require essential printing features without overwhelming complexity. It offers exceptional print quality and speed suitable for everyday tasks while being easy to maintain. The straightforward interface encourages efficiency for users of all skill levels.

Lastly, the C264 serves as a step up in performance and functionality compared to its counterparts. With print speeds of up to 26 pages per minute and advanced color management capabilities, users can expect dazzling print output every time. Its comprehensive network connectivity options, including wireless and mobile printing support, make it adaptable to modern office needs.

Overall, these Panasonic multifunction printers reflect a blend of efficiency, user-friendliness, and advanced technology, making them suitable for a variety of business environments. The solid build quality and emphasis on innovation ensure they deliver reliable performance day in and day out, meeting the ever-evolving printing and imaging needs of today's businesses.
Top Page Image Contents