Insert/Remove an SD Memory Card

■How to insert an SD memory card

Important:

• Before inserting a SD memory card, make sure that the power of the unit is turned off.

z Open the front cover.	c Insert an SD memory card into the SD memory card
	slot.

OPERATE
LINK	RCV	SND

Network Interiace Unit

WJ-NT304

Front cover

xDetach the SD memory card slot cover by loosening the screw.

OPERATE LINK	RCV	SND

OPERATE LINK	RCV	SND

SD memory card slot

vAttach the cover and tighten the screw.

bClose the front cover.

SD memory card slot cover

■How to remove the SD memory card

Important:

•Before removing the SD memory card, select "Not use" for "About SD memory card" on the [SD memory card] tab of "Basic Setup" on the setup menu first. (☞ Network Operating Instructions (PDF)

zOpen the SD memory card slot cover by following steps 1 and 2 of the "How to insert an SD memory card" sec- tion.

x Release the locked SD memory card by pushing the card and then pull the SD memory card from the slot.

cAttach the cover and tighten the screw.

vClose the front cover.