Panasonic CF-74CCBAXBM manual Setting the LCD Unit, Inverter, Arranging the W-LAN L and R Cable

10.2. Reassembly Instructions

10.2.1. Attention when CF-74 series is repaired

•Please execute writing BIOS ID when you exchange the Main Board.

•You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.

10.2.2. Setting the LCD Unit and the

LCD Unit

Inverter

1.Fix the W-LAN PCB L and R to the LCD Rear Cabinet using the two Screws <N18>.

2.Attach the Inverter with the Inverter Case to the LCD Rear

Cabinet.

3.Set the LCD Unit to the LCD Rear Cabinet.

4.Connect the LCD/INV. Cable to the Connector on the

Inverter.Inverter

Screws <N18>: XQN17+BJ6FJ

Inverter

Case

<N18>	W-LAN PCB L
LCD/INV. Cable
	<N18>

W-LAN PCB R

LCD Rear Cabinet

￿Arranging the W-LAN L and R Cable

W-LAN Antenna L PCB W-LAN Antenna R PCB

Attach the Tape to hold the Cable.

Pass the Cable through the notch and lead it downward.

Lead the Cable along the surface.

Attach the Tape to each of the Cables. (Avoid overlapping.)

Pass the Cable through the notch and lead it downward.

Pass the Cable between the boss and rib.

Avoid overlapping of the Cables (all the way).

Pass the Cable through the notch. (Avoid running over the ribs.)

LCD Rear Cabnet

Pass the Cable through the notch. (Avoid running over the ribs.)

10-7