Panasonic AJ8R manual Specifications, Contact rating, Coil rating, To +140 F

AJ8R

SPECIFICATIONS

1. Contact rating

	Resistive load	Motor load
Voltage		(EN61058-1)	Inrush load
	(pf = 1)
		(pf = 0.6)
125V AC	16A	—	160A (8.3ms)
125V AC	10A	4A	—

Remark: The motor load is in accordance with EN61058-1. Inrush current can be switched up to the value of 6 times the indicated rating.

2. Coil rating

Nominal Voltage	Drop-out voltage		Nominal operating current	Coil resistance	Maximum voltage
*(Max. 10 sec)	(at 20°C 68°	F)	[±10%] (at 20°C 68° F)	[±10%] (at 20°C 68° F)	(Max. 1 sec)
5V DC	Max.4.5V		725mA	6.9Ω	5.5V
	Min.0.5V
12V DC	Max.10.8V		300mA	40Ω	13.2V
	Min.1.2V
24V DC	Max.21.6V		150mA	160Ω	26.4V
	Min.2.4V

Remark: If the rated voltage is applied to the coil for more than ten seconds or the maximum voltage is applied for more than one second, coil perfor- mance will deteriorate.

3. Characteristics

	Manual operation	Min.104
		(at 7 cpm.,at rated load)
Electrical life
	Coil operation	Min.103
		(at 7 cpm.,at rated load)
		Min.5×104(at 7 cpm. 5A 125V AC resistive load)
Mechanical life		Min.5×104(at 20 cpm.)
Initial contact resistance		Max. 100mΩ
(By voltage drop at 1A, 2 to 4V DC)
Initial insulation resistance		Min. 100mΩ (at 500V DC measured by insulation resistive meter)
Initial breakdown voltage	Between contacts	2,000 Vrms
	Between coil and contact	4,000 Vrms
		0°C to +60°C
Ambient temperature		32° F to +140° F
		(Not freezing below 0°C 32° F)
Ambient humidity		Max. 85% R.H.
Vibration resistance		10 to 55 Hz at single amplitude of 0.75mm
	Functional	Min.294m/s2{30G}
Shock resistance		(Contact opening Max. 1ms)
	Destructive	Min.980m/s2{100G}
Tensile terminal strength		.250 Quick-connect terminal Min. 98N{10kgf}/min.
		(Pull & push direction)
Actuator strength		39.2N{4kgf} for 1min. operating direction
Contact release time		Max. 100ms (at rated voltage)
Initial operating force		4.9N or less (Max. 500gf or less)
* Reference value		Setting force after reset has been released: Max. 6.86N or less (Max. 700gf or less)
Flame retardancy		UL94V-0
Tracking resistance		Min. 175
		Single pole, single throw: Approx. 17g .60oz
Unit weight		Single pole, double throw: Approx. 19g .67oz
		Double pole, single throw: Approx. 20g .71oz

Remark: Test conditions are in accordance with EN61058-1,UL1054 and JIS C 6571

7

03/2005