Using the index window function
This function lets you store a picture which is being projected into memory, so that you can display a still picture and a moving picture on the screen.
Select INDEX from the FUNCTION item in the OPTION menu to use this function. (Refer to page 38.)
Using the shutter function
The shutter function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation. The projector uses less power in shutter mode than it does in normal projection mode.
#Press the F (function) button.
NOTE:
BThe aspect ratio of the screen changes and the image is vertically elongated in comparison to a normal image.
$Use the F and G buttons to select a screen size.
The screen size can be chosen from 3 options.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Still | Moving |
Still | Moving |
|
|
|
|
| ||
picture | picture |
|
|
|
| picture | picture | |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Still | Moving |
picture | picture |
|
|
Still | Moving |
picture | picture |
|
|
#Select SHUTTER from the MAIN MENU screen and then press the ENTER button.
$Press any button on either the projector or remote control unit to return to normal operating mode.
Changing the display language | Operation | |||
#Select LANGUAGE from the MAIN MENU screen and then press the | ||||
ENTER button. |
| |||
$Use the FG buttons to select a language and then press the ENTER | ||||
Basic | ||||
button. |
| |||
LANGUAGE ENGLISH |
| Indicates the language which is | ||
| ||||
|
| |||
%Use the I and H buttons to switch between the still picture screen (left) and moving picture screen (right).
|
|
|
|
|
|
|
|
|
Still | Moving |
|
|
|
| Moving | Still | |
picture | picture |
|
|
|
| picture | picture | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
&Press the ENTER button to store the picture in memory.
NOTE:
BWhen the screen size is changed, the picture’s aspect ratio will also change. Make sure that you fully understand the notes on S2 and S1 signals which are given on page 30 before using the index window function.
BWhen steps $ and % are carried out, the memory will be reset and a new picture will be stored in memory.
ENGLISH | currently set |
DEUTSCH | |
FRANÇAIS |
|
ESPAÑOL |
|
ITALIANO |
|
SELCT ENTER | ESC |
Muting the sound
The sound can be muted for temporary interruptions such as telephone calls. Press the MUTE button once to turn off sound, and press MUTE again to regain sound.
NOTE:
BTurning off the power will cancel adjustments such as volume level set with the VOLUME +/- buttons.