Panasonic PT-AE4000E Connections, Lens shift and positioning, Before connecting to the projector

Setting up

Lens shift and positioning

If the projector is not positioned right in front of the centre of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens.

JJ Adjusting the lens shift dials

Horizontal shift Vertical shift

QQ Horizontal shift

You can place the projector where the projector lens is up to 40 % horizontally off-centre from the screen and then adjust the image position with the Lens shift dial • Horizontal.

Up to about 40 %	Up to about 40 %
of the projection	of the projection

Turning the dial	Turning the dial
clockwise:	counterclockwise:
Image moves to the right	Image moves to the left

QQ Vertical shift

You can place the projector where the projector lens is up to 100 % vertically off-centre from the screen and then adjust the image position with the Lens shift dial • Vertical.

Turning the dial counterclockwise:

Image moves to the bottom

Up to about 100 % of the projection

Up to about 100 % of the projection

Turning the dial clockwise:

Image moves to the top

Getting Started

Connections

Before connecting to the projector

Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off.

Use cables that match each peripheral device to be connected.

Confirm the type of video signals. See “List of compatible signals” on page 31.

Audio cables must be connected from each peripheral device directly to the audio reproduction system.

NOTE:

•• See the functional instructions that is in the provided CD-ROM.

ENGLISH - 15