Switching the projector on/off
Switching on the projector
POWER indicator
Basic Operation
1. | Switch the MAIN POWER button on. | 3. Press the POWER button. |
| The power indicator lights up in red. | The power indicator lights up in green after flashing |
2. | Remove the lens cover from the lens. | for a while. |
|
| The STARTUP LOGO is displayed on the screen. |
|
| See “STARTUP LOGO” on page 38. |
NOTE:
•
•When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and do not affect the performance of the projector.
•Do not attempt to modify the lens cover which may cause burns, fire or damage to the projector.
Switching off the projector
POWER indicator
1. Press the POWER button.
The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any operation.
To return to the projection, press ENTER to select CANCEL or press MENU/RETURN.
2.Press I to select OK and press the POWER or ENTER button.
The power indicator lights up in orange while cooling the lamp, then illuminates red when it is ready to switch off the MAIN POWER button.
3.Switch off the MAIN POWER button on the back of the projector.
NOTE:
• Press the POWER twice or for a long duration to switch the power off.