Panasonic PT-D3500E manual Powering off the projector Direct power off function

Page 23

Powering off the projector

Direct power off function

ENGLISH

Press the POWER button on the main unit, or the POWER OFF ( ) button on the remote control.

Select “Execute” with or button and press the ENTER button.

(or press the POWER button again.)

The projection of the image stops, and the power indicator of the main unit lights up orange. (The cooling fan keeps running.)

Wait until the power indicator of the main unit turns to red (i.e., until the cooling fan stops).

Press the “ ” marked side of the MAIN POWER switch to remove all power from the projector.

Attention • Do not turn the power supply off and then immediately back on again.

Turning on the power supply will not light up the light source lamp if the lamp is in the process of cooling down after turning off the power supply. To light up the lamp, turn on the power supply again when the lamp has been cooled sufficiently. Turning on the power supply with the lamp in the hot condition may shorten the lamp life.

Note • The projector consumes approximately 15 watts of power even in standby mode after the cooling fan stops. (Power indicator lit in red)

If you re-power the projector after shutting off the main power inadvertently, the projection lamp may remain unlit. Please turn the power on again after a while.

The power supplied internally causes the cooling fan to continue operating and cool off the lamp when the power has failed or even after the power cord is disconnected immediately after the power has been turned off.

Note • When the lamp has been cooled by the direct power OFF function, it sometimes

takes longer than usual for the lamp to light up again.

While the cooling fan is operating, do not place the projector inside a box or bag.

The operation time of the cooling fan will be less if fewer than 2 minutes have elapsed since the power was turned on.

23

Downloaded from www.Manualslib.com manuals search engine

Image 23
Contents Model No. PT-D3500E Commercial UseDear Panasonic Customer Important Safety NoticeImportant the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Always disconnect all cables before moving the projector Do not disassemble the lamp unitDo not place liquid containers on top of the projector Do not insert any foreign objects into the projectorDo not use the old lamp unit AccessoriesUse only the specified battery Do not look into the lens while the projector is being usedPrecautions on handling Name and function of parts Set to Computer When the operation mode selectorFront and side of the projector Rear and side view of the main unit Controls on upper panel Side-mounted connection terminals Loading dry cells Using the remote control unitEffective range of remote control operation Operation mode selector switch Setting projector ID number to remote controlUsing the remote control as a PC mouse Using a wired remote control Projection distances InstallationInstallation geometry Projection schemesPin assignments on the RGB2 input port are as follows Setup precautionsConnection Audio Amplifier Digital Hi-vision video deck Speakers Example of connecting with AV productsControl PC DVD player Example of connecting with PCs Guide groove Projection lens How to install the projection lensHow to remove the projection lens Lens signal contactProjection Powering up the projectorMaking adjustment and selection Roughly adjust the focus of the lens. Refer toPowering off the projector Direct power off function Choose an item and adjust it using buttons How to adjust the lensHow to adjust the lens position to the left or right Press the Shutter button again Automatic adjustment Auto SetupUsing the Freeze function Using the Shutter functionChange the magnification with the D.ZOOM + button Using the digital zoom D.ZOOM + functionPress the D.ZOOM + button of the remote control Magnification can be adjusted from 1.0 to 3.0 timesStructure of menu screens On-screen menusReturning to the previous Menu items settingResetting to the factory default Basic menu operationsAdjusting the picture TV-SYSTEM Sharpness is used to adjust the crispness of the imageSignal Scan Colour SharpnessAdjusting the position How to use Advanced Menu Audio Mute Adjusting the audioVolume You can adjust the sound volume Sound volume decreasesOPTION1 settings OPTION2 settings FUNC1 PasswordFAN CONTROL2 Auto POW.OFFText Display Setting the securityInput Password Amend PasswordConnection example Setting the networkConnecting the PC System requirementsExamples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory settingRemarks Control commandsCable specifications Connecting to a PCPin assignments and control Using the Remote 2 terminalLamp Information Checkpoint Remedial measure TemperatureIndication of lamp monitor Dismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filterReplacing the lamp unit Timing of lamp unit replacementHave a Phillips screwdriver ready ahead of time Lamp unit replacement stepsLamp unit will be hot after it has been used You might get burned if you touch it while it is still hotSystem Information screen will be displayed An item Lamp Time Reset will be addedUsed hours of the lamp unit will be reset to zero Old password input field New password input field Using Web Browser ControlAccessing from the Web browser Password changeMonitor information button Change password button Power On/Off control Shutter controlBasic control Displays the firmware version Detail controlMonitor information Parameter Description Error informationWhen Failed has appeared for an item OK Normal operationLamp Runtime remaining Mail setupPrimary DNS server address Mail setup page continuingDNS server set up Button to update settingsPing test POP server setupAdjust clock Contents of mail sentNetwork status Network configCommand Control Description Remarks Using the PJLink protocolSupported commands PJLink security authenticationNot turn on Symptoms ChecksPower does Remote controlSpecifications Wireless mouse receiver Length of power supply cord CabinetOutside dimensions Remote control Power sourceCompatible Signal List Calculation formulas for projection distance by lens types Projection distances by projection lensUnit mm DimensionsProduct For business users in the European UnionTrademark Acknowledgement M0605-0
Related manuals
Manual 64 pages 21.5 Kb

PT-D3500E specifications

The Panasonic PT-D3500E is a high-performance portable projector designed primarily for professional and business environments. Offering outstanding image quality, versatility, and usability, it is well-suited for a variety of applications, including conferences, classrooms, and large-scale events.

One of the standout features of the PT-D3500E is its impressive brightness, delivering up to 3,500 lumens. This ensures vibrant and vivid image reproduction, even in well-lit environments. Featuring a compact and lightweight design, the projector is easy to transport, making it a convenient choice for on-the-go presentations.

The PT-D3500E utilizes a 3LCD optical system, which guarantees excellent color accuracy and uniform brightness across the projected image. This technology works by projecting red, green, and blue light simultaneously, resulting in stunningly realistic images that capture audience attention.

Additionally, the PT-D3500E incorporates a high-resolution WUXGA (1920 x 1200) resolution, providing sharp details and clarity for both text and visuals. This level of detail is crucial for presentations where fine details can make a significant impact, ensuring that every slide is eye-catching and professional.

The projector is designed with advanced connectivity options, including HDMI, VGA, and component inputs, which allow for seamless integration with various devices. This versatility ensures compatibility with laptops, tablets, and other multimedia sources, enabling users to showcase content effortlessly.

In terms of operation, the PT-D3500E features a user-friendly interface and remote control for easy navigation and settings adjustment. The model includes a range of flexible lens options, allowing users to adapt the projector to different room sizes and layouts effectively. With a long lamp life of up to 4,000 hours in eco mode, users can rely on this projector for extended use without frequent maintenance.

The PT-D3500E also emphasizes environmental sustainability, incorporating features that reduce energy consumption and comply with international eco-friendly standards. Its robust construction ensures durability, making it a reliable choice for demanding professional use.

In conclusion, the Panasonic PT-D3500E represents a versatile, high-quality projection solution ideal for professionals seeking bright, detailed images and ease of use. With its advanced features, connectivity options, and robust design, it stands out as a top choice for various presentation needs.