Getting Started
Connections
Before connecting to the projector
Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See “List of compatible signals” on page 45.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.
Connecting to COMPONENT IN/VIDEO IN/S-VIDEO IN
\
DVD player
To COMPONENT video output
To
To VIDEO output
Video player
Connecting to COMPUTER IN/HDMI IN
HDMI cable
| RGB signal cable |
To HDMI output | (Commercial item) |
DVD player | Computer |
NOTE:
•Make sure the HDMI cable is adapted to your HDMI device for proper performance.
•A compatible cable is required for an HDMI 1 080p signal.
•It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not project the image properly or other problems could be encountered. “Serial terminal” on page 46