Panasonic PT-FW100NTE manual Capturing an image, Stopping the projection temporary

		Remote control operation
Capturing an image
	When projecting an image, press FREEZE to	Press the FREEZE button to return to the projection.
	capture the projected image and display it on
	the screen as a still picture. While the image is
	frozen, the sound will be stopped.
Stopping the projection temporary
	You can turn off the lamp and stop the	Press the SHUTTER button to return to the projection.
	projection temporary for electrical power save.
Resetting to the factory default settings
	You can reset most of the customised settings
	to the factory defaults by pressing the	NOTE:
	DEFAULT button of the Remote control.	• Some menu items are not available to reset by pressing
	Display the required sub menu or the menu	the DEFAULT button. Adjust each menu items
	items, and press the DEFAULT button again.	manually.
	See “Main menu and Sub-menu” on page 30.	• To reset all the settings to the factory defaults, see
		“INITIALIZE ALL” on page 38.

Projecting an image in INDEX-WINDOW mode

You can project an image in split 2 windows as an INDEX-WINDOW, one is frozen, stored in memory and displayed on the screen’s left side, while the display of subsequent images continues on the right.

To escape from the INDEX-WINDOW, press the MENU or RETURN button.

Projected image Frozen image

Continuing image

Changing the image size

Press F G to switch and cycle through in 3 size.

Frozen image

Continuing image

NOTE:

•If you change the window size, the aspect ratio of the image is changed and becomes vertically elongated.

Basic Operation

	Switching the position		Capturing a new image
	In default, the frozen image is displayed on the left		While in INDEX-WINDOWmode, press ENTER to
	and the subsequent image is displayed on the		capture a new image and the frozen image window
	right. Press I H to switch the position.		will be updated in a while.
Frozen image		Continuing image

Continuing image Frozen image

ENGLISH - 27