Panasonic PT-F300 Direction of Air Intake and Exhaust, Operating the Projector Continuously

Page 11

S P E C F I L E

LCD Projector

PT-F300

Notes on Projector Placement and Operation

The projector uses a high-wattage lamp that becomes very hot during operation.

Please observe the following precautions.

1.Never place objects on top of the projector while it is operating.

2.Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector's exhaust open- ings. In addition to this space, also ensure that there is a sufficient work space for removing and installing the lamp, filter and other parts.

3.If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector is between 0°C/32°F and 35°C/95°F. Also make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings.

200 mm (7-7/8˝) or more

500 mm (7-5/8˝) or more

500 mm (7-5/8˝) or more

Direction of Air Intake and Exhaust

Intake

Exhaust

Operating the Projector Continuously

1.When the projector is operated continuously 10 hours or more, the lamp replacement cycle decreases.

2.The lamp replacement cycle also decreases when the projector is used for short periods of time (less than one hour) repeatedly.

Replacing the Filter Unit

The projector is equipped with the Auto Cleaning Filter (ACF) function, which automatically winds the air filter to set a new filter element in place according to operating conditions. The filter unit replacement cycle is approximately 10,000 hours. Please purchase the ET-ACF100 filter unit for replacement use.

Weights and dimensions shown are approximate. Specifications are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. Intel, Pentium, and Intel Core are trademarks or registered trademarks of Intel Corporation or its sub- sidiaries in the United States and other countries. Microsoft, Windows Vista and Windows are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries. Apple, Mac, Mac OS, and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. PowerPC is a trademark of International Business Machines Corporation, registered in the U.S. PJLink is a registered trademark or trademark in Japan, the United States, and other countries and regions All other trademarks are the property of their respective trademark owners.

As of October 2008

 

< 11 >

Image 11
Contents PT-F300 PT-F300 SpecificationsVideo Terminals DimensionsCalculation of the projection distance Standard setting-up positionsProjection distance screen aspect ratio Horizontal direction Installable angleShift range Vertical directionComputer data compatibility List of compatible signalsCable specifications Serial connectorPin assignments and signal names Communication conditions factory settingStatus asking commands Control commandsParameter format Command exampleReplacing the Filter Unit Direction of Air Intake and ExhaustOperating the Projector Continuously