Panasonic PT-LB20VU manual Preparation, FCC RF Exposure Warning if provided with wireless device

Page 3

CAUTION:

 

This equipment is equipped with a three-pin

 

grounding-type power plug. Do not remove the

 

grounding pin on the power plug. This plug will only

 

fit a grounding-type power outlet. This is a safety

 

feature. If you are unable to insert the plug into the

 

outlet, contact an electrician. Do not defeat the

Do not remove

purpose of the grounding plug.

 

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION: To assure continued compliance, use only shielded

interface cables when connecting to computers or peripheral devices.

Any unauthorized changes or modifications to this equipment will void the users authority to operate.

If you use serial port to connect PC for external control of projector, you must use optional RS-232C serial interface cable with ferrite core. Any unauthorized changes or modifications to this equipment will void the user’s authority to operate.

FCC RF Exposure Warning: (if provided with wireless device)

–This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

–This equipment has been approved for mobile operation and requires minimum 20 cm spacing be provided between antenna(s) and all person's body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

–This equipment may not be used with other installed transmitters, which may be capable of simultaneous transmission.

Preparation

ENGLISH-3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model No. PT-LB20NTU LCD Projector Commercial UseModel number PT-LB20NTU / PT-LB20U / PT-LB20VU / PT-LB20SU Dear Panasonic CustomerPreparation FCC RF Exposure Warning if provided with wireless devicePanasonic Declaration of ConformityContents Precautions with regard to safety Do not overload the wall outletDo not remove the cover or modify it in any way Do not place liquid containers on top of the projector Do not handle the power cord plug with wet handsInsert the power cord plug securely into the wall outlet Do not place the projector into water or let it become wetDo not place any heavy objects on top of the projector Do not look into the lens while the projector is being usedDo not cover the air inlet port or the air outlet port Always disconnect all cables before moving the projectorInsulate the battery using tape or similar before disposal Do not put your weight on this projectorUse only the specified batteries Accessories Be sure to attach the lens cover before moving the projector Before useLamp Order to get the best picture qualityDo not touch the surfaces of the lens with your bare hands ScreenLeg adjuster buttons L/R Lens cover Projection lens Remote control signal receptorLocation and function of each part $%$ # Connector panel $ Air outlet portVideo in connector pages 22 # Power input socket ACRGB1 in connector pages 21 RGB2 IN/1 OUT connector pages 21, 22Menu Remote control unit# RGB Input indicator $ Lamp indicatorIllumination sensor Temp indicatorAuto Setup button pages 25 Volume +/- buttonsProjection methods Setting-upProjection distances Projector positionPT-LB20SU Connections Connecting to computerET-ADSER Connecting to video equipmentInsert the battery holder Preparation for the remote control unitTurning on the power $Press the Power buttonTurn on the power of all connected devices Adjusting the focus Press the input select button to select the input signalAdjusting the angle Adjusting the size#Press the Power button Turning off the powerDirect power off function Power button on the projectorProjector status Press the Auto Setup button Pausing a picture Freeze Turning off the picture and sound momentarily ShutterPress the Freeze button Enlarging the picture D.ZOOM Adjusting the volume VolumeRemote control unit functions during D.ZOOM digital zoom Press the Volume +/- buttonPress the Index Window button Displaying two screens Index WindowKeystone correction On-screen menusMenu screens KeystoneLanguage menu Index Window function Shutter function Volume adjustmentAdjustments and settings Position menuMenu operation guide Select Enter Retrn Returning a setting to the factory defaultSTD Contrast Bright Color Tint Sharpness Color TempOperation Correcting keystone distortionVertical keystone distortion correction only VerticalPicture Mode Adjusting the pictureTint ContrastBright ColorMode Auto OFF DaylightviewDaylightview TV-SYSTEM Auto Ntsc Still ModeSignal Mode TV-SYSTEMDOT Clock Adjusting the positionClock Phase PositionAspect Auto AspectFrame Lock ResizingChanging the display language Auto Search Option settingsAuto Signal OSDBlackboard Sxga ModeRGB2 Select RGB/YPBPRLamp Runtime Lamp PowerDESK/CEILING FAN ControlPower Memory Control KEYAuto POW.OFF Setting up the security function Input PasswdAmend Passwd Text Change Text DisplayWEB Control DefaultNetwork Name ChangeRemedy Lamp indicator Temp indicatorLamp Power Lamp indicatorAir filter should be cleaned every 100 hours of use Cleaning and replacing the air filterCleaning Replacement procedureReplacing the lamp unit Lamp unit replacement periodLamp unit replacement procedure Press and hold the Enter button for approximately 3 seconds Control KEY Auto POW.OFF DisableFRONT/REAR Front DESK/CEILING SelectBefore calling for service Cleaning and maintenance PT-LB20VU SpecificationsOptions Remote control unitDisplay Scanning List of compatible signalsPicture Resizing*3 Frequency Quality Mode AppendixPT-LB20VU Projection dimensions calculation methodsConnection Using the Serial connectorPin assignments and signal names Communications settingsControl commands Cable specificationsCommand Control Remarks Contents

PT-LB20VU, PT-LB20U, PT-LB20SU specifications

The Panasonic PT-LB20SU, PT-LB20U, and PT-LB20VU are three exceptional projectors designed to deliver outstanding performance in various environments, including educational settings, business meetings, and home theater applications. These projectors are compact, lightweight, and packed with features, making them ideal for mobile presentations or fixed installations.

One of the standout features of the PT-LB20 series is its impressive brightness level, reaching up to 2000 lumens. This high brightness ensures clear and vivid images, even in well-lit rooms. The projectors support XGA resolution (1024 x 768 pixels), providing sharp visuals that enhance text readability and image detail.

The usability of the PT-LB20 projectors is complemented by Panasonic's advanced Daytime Mode, which optimizes image quality for brighter rooms. This feature is particularly beneficial for classrooms and conference rooms with significant ambient light, allowing for a comfortable viewing experience without straining the eyes.

In terms of connectivity, the PT-LB20 series comes equipped with multiple input options, including HDMI, VGA, and composite video ports, making it versatile enough to connect to various devices like laptops, Blu-ray players, and digital cameras. This variety alleviates compatibility issues and enhances user convenience.

The projectors are powered by a 230W UHM lamp that offers a long lamp life of approximately 5,000 hours in standard mode and up to 6,000 hours in eco mode, reducing maintenance costs and the frequency of replacements. The eco mode also helps reduce energy consumption, making these projectors more environmentally friendly.

The PT-LB20U stands out with its optional wireless module, facilitating easy connectivity without messy cables, which is ideal for dynamic presentations. Additionally, the PT-LB20SU and PT-LB20VU models feature built-in speakers that deliver decent audio quality, eliminating the need for external sound systems in smaller setups.

These models are designed with portability in mind, weighing only around 2.5 kilograms, making them easy to transport between locations. Their compact design also allows for easy setups, whether in classrooms, conference rooms, or even outdoor settings.

With their robust build quality and advanced features, the Panasonic PT-LB20SU, PT-LB20U, and PT-LB20VU projectors represent a reliable choice for users seeking performance, versatility, and ease of use. These projectors embody Panasonic's commitment to delivering innovative display solutions that cater to a wide variety of professional and educational needs.
Top Page Image Contents