Panasonic DMC-SZ9 manual How to Use the Wi-Fi Setup Menu, 168, Change Workgroup Name

Wi-Fi

How to Use the [Wi-Fi Setup] Menu

For details on how to select the [Wi-Fi] menu settings, refer to P44.

Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi.

1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P44)

2Press 3/4 to select item, and press [MENU/SET].

[Smart Transfer] —

•Refer to P159 for details.

[LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID.

•Refer to P163 for details.

[PC Connection]

You can set the workgroup.

To send images to a PC, a connection to the same workgroup as the destination PC is required.

(The default setting is “WORKGROUP”.)

[Change Workgroup Name]:

Enter the workgroup of the connecting PC. Close the menu after changing settings.

[Restore to Default]: Restores the default state.

Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed.

• For details on how to enter characters, refer to “Entering Text” section on P80.

• If you are using the PC with standard settings, you do not need to change the workgroup.

	You can change the name of this unit.
[Device Name]
	1	Press [DISP.].
	2	Enter the desired device name.

• For details on how to enter characters, refer to “Entering Text” section on P80.

• Up to 32 characters can be entered for [A], [a], [1], and [&].

- 168 -