LAN Port
P0715 provides one Intel 82562ET 100/10
Ethernet
For network connection, follow the instructions below;
1.Turn off the Panel PC system and the Ethernet hubs.
2.Plug in one end of cable of a 100/10
USB Ports
P0715 provides four external USB ports to connect to external USB devices. USB ports and devices are hotplug capable. Therefore any USB device can be connected at all time without the need to power down your system. Note that for many of these
devices you will first have to install proper device drivers before they can be recognized by the system
PS/2 Keyboard/Mouse
P0715 provides two standard PS/2 keyboard/ mouse connectors located at the rear panel. If the user would like to use AT keyboard, then an adapter to connect the PS/2 KB to AT KB is needed.
DC Power Input and Power Switch
One end of the power cable is fitted with a standard power connector that connects to
To connect the system to power, follow the following instructions :
1Make the system power switched off.
2Plug the circular connector firmly into the circular socket on the rear panel.
3Connect the standard male plug to an electrical outlet.
4For operation, power up the system.
P0715 Quick Installation | 11 |