2. Tablet Cable Set-up For Charging and Syncing
1. Before installing the iPad charge cable
(USB to iPad connector) please make sure the power cord is disconnected from the wall outlet. Unlock the cart and open the doors.
2. Connect the USB cable connectors sequentially to the power module ports that correspond to the numbered slots.
3. Repeat USB cabling steps for the rest of the USB connector cables.
4. Turn to the back of the cart, Wrap the excess USB cable around the cable organizers. Connect the USB connectors in sequence to the power module on the bottom of the cart.
5. Put tablets into the slots. Connect the USB charging cables to the tablets/iPads.
4
Charging
The power cord needs to be plugged into the wall outlet.
Plug in and switch ON, the cart will then start the charging.
NOTE: the cart will not charge and sync at the same time.
LED indicator :
1 The indicator for each iPad is on the top of cart.They are sequencelly numbered LEDs corresponding to each tablet in the slots.
LED Color Green = Charged.
LED Color Amber = Charging in progress.
Note:
LED indicators may have abnormal display if the USB cable is damaged or if a different version.
5