Removing and replacing a FRU
1200 Fan assembly
For access, remove these FRUs in order:
v“1010 Battery pack” on page 55
v“1040 Hinge caps” on page 60
v“1050 Keyboard” on page 62
v“1080 Keyboard bezel for X60 Tablet” on page 67
v“1090 Palm rest for X61 Tablet” on page 68
v“1100 Keyboard bezel for X61 Tablet” on page 71
v“1120 PCI Express Mini Card for wireless LAN” on page 74
v“1130 PCI Express Mini Card for wireless WAN” on page 75
v“1170 LCD assembly” on page 80
v“1180 Pen switch assembly, Bluetooth cable, and base cover” on page 83
Attention: Do not handle the fan roughly. Improper handling of the fan can cause distortion or deformation and imperfect contact with components.
Note: The fan assembly is attached to the underside of the system board.
3
2
Step | Screw (quantity) | Color | Torque |
|
|
|
|
| M2 × 3.5 mm, | Silver | 0.167 Nm |
|
|
| (1.7 kgfcm) |
|
|
|
|
In step | , loosen the screws, but do not remove them. | ||
|
|
| |
|
| 5 |
|
4
When installing: Make sure that the fan connector is attached firmly.
ThinkPad X60 Tablet and X61 Tablet 87