Hisense SERO7, E270BSA user manual Micro SD, Headphone, Wi-Fi

Micro SD

microSD Card

Insert the microSD card contacts facing down into the Sero 7’s Micro SD port.

To check the storage of microSD card, go to Settings > Device > Storage.

NOTES • You can use microSD TM card and microSDHC TM card.

• Never remove or insert microSD card while the Sero 7 is powered on.

Headphone

Audio left Grounded

Audio right

Headphones can be connected to the Sero 7’s headphone port. For more information about headphones, see Important Safety Instructions on page 54 .

Wi-Fi

You can connect to a wireless access point, or hotspot to use Wi-Fi. Some hotspots are open and you can simply connect to them. Others implement security features that require other steps to set up.

NOTE To extend the life of your battery between charges, turn off Wi-Fi when you’re not using it.

Connect to a Wi-Fi Network

If you’re adding a Wi-Fi network when first setting up your device, Wi-Fi is turned on automatically.

1.Open Quick Settings, tap Wi-Fi icon, or go to Settings > Wireless & networks > Wi-Fi.

2.Slide the Wi-Fi switch to the ON position.

3.The device scans for available Wi-Fi networks and displays the names of those it finds. If the device finds a network that you connected to previously, it connects to it.

4.Tap a network name to see more details or connect to it, and enter a password if necessary.

5.Or, if your Wi-Fi router supports Wi-Fi Protected Setup, tap the WPS icon at the top of the screen, and then tap the same button on your router.

NOTE To modify a network’s settings, press & hold the network name.

Making Connections

11